LPCB addressable fire alarm panel for project

Asenware addressable fire alarm panel for building
Product Description
INTRODUCTION
The purpose of the AW-FP300 Fire Alarm Control Panel (FACP) is to monitor input signals, give indications and possibly activate outputs as programmed. It is designed to comply with EN 54-2 & EN 54-4 with qualities of simple installation, operation and easy maintenance.
The AW-FP300 panel is an addressable fire detection panel with 1 loop of 324 addressable points and expansion capabilities. It is compatible with other peripherals made by ASENWARE with its own protocol.
PRODUCT FEATURES
1. Up to 324 addresses on one loop
2. An easy to read, 4.3'' color screen LCD with a resolution of 480x272
3. Zone indication and control panel(ZCP) for 32 zones gives a quick indication of the location of an alarm
4. Record capacity of 1000 historical events for each of historical fire, historical fault and historical operation
5. An independently programmable conventional sounder circuit output
6. Integral power supply and battery
7. Integral printer
8. Flexible and intuitive cause and effect programming on front panel
9. Zone test, point test and module start/stop testing facilitate the commissioning
10. U-disk interface makes the load and save of configuration or historical data convenient for system commissioning and maintenance
11. Hierarchy management with three access levels
12. Anti-tamper protection by a key lock
13. CAN bus for interconnection of up to 20 FACPs and RS485 for connection with up to 30 fire indicating panels per FACP
Parameters
Power Supply Mains supply 230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A Mains fuse T3.15AL250V Operating voltage 18.5 ~ 30VDC Recommended mains cable Screened or standard/black mains cable, cable size 0.75mm2 Power rating Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A Max. charging current 1.2A Max. battery supply current 4A (when the Mains is disconnected) Battery capacity, type and recommended model Max. capacity 2x12V/17Ah; Min. capacity 2x12V/12Ah
VRLA. PS-12170 for 17Ah (Power-sonic), PS12120 for 12Ah (Power-sonic) Max. internal resistance of battery 1.5ΩBattery fuse F8AL250V Recommended battery cable 14AWG Quiescent current (full loaded) < 0.4A
Outputs S.C. Out (+, -) Output voltage 18.5 ~ 30VDCMax. output current 0.5A Fuse rating F1AL250V End of line resistor 4K7 Recommended type of cable Plain unscreened cable, 1.5mm2 Cable diameter 1mm2 ~2mm2 Transmission distance ≤1500m Max. number of sounders @50mA 20
F.P.E. Out (+, -)
F.A. Out (+, -) Output voltage 18.5 ~ 30VDCMax. output current 0.5A Fuse rating F1AL250V End of line resistor 4K7 Recommended type of cablePlain unscreened cable,1.5mm2 Cable diameter 1mm2 ~2mm2 Transmission distance ≤1500m
Fault Out
(NC, COM, NO) Contact capacity 30VDC at 2A, 125VAC at 0.5ARecommended type of cable Plain unscreened cable,1.5mm2 Cable diameter 1mm2 ~ 2mm2 24VK (+, -) Output voltage 18.5 ~ 30VDC Max. output current 0.6A Fuse rating F1AL250V Recommended type of cablePlain unscreened cable,1.5mm2 Cable diameter 1mm2 ~2mm2
Input Class change (+, -) Input mode Passive Cable resistance ≤500ΩRecommended type of cable Plain unscreened cable, 1.5mm2 Cable diameter 1mm2 ~2mm2
Loop
Loop Out (+, -)
Loop In (+, -) Output voltage 16.5 ~ 30VDC, pulse Output current 0 ~0.3A Loop type Class A Recommended type of cable Screened or unscreened twisted-pair, 1.5mm2 Transmission distance ≤1000m Cable diameter 1mm2 ~2mm2
Network Communication RS-485 Max. number of FIPs 30 Transmission rate 9600 bps Recommended type of cable Screened or unscreened twisted-pair, 1mm2 Transmission distance ≤1000m Cable diameter 1mm2 ~5mm2 CAN Max. number of panels 20 Transmission rate Optional: 10K, 20K, 50K and 100K bps Recommended type of cable Screened or unscreened twisted-pair, 1mm2 Transmission distance ≤1000m Cable diameter 1mm2 ~5mm2
Wiring Diagram
Related Products

Packaging & Shipping
Certifications
FAQ
Q1: How about the quality of the products?
A: We produce every product with good quality materials, and test carefully to make sure stable quality before shipment.Q2: Can I have a sample order?
B: Yes, Of course you can . we welcome sample order for your testing and checking products quality.Mixed samples are avaliable.Q3: What is the shipping time?
C: Small Qty order needs 3-5 working days, big Qty order usually needs 10-5 working days after
payments arriving. That's depends on order Qty.Q4: How to proceed the order if I have logo to print?
D: We will prepare artwork for visual confirmation at first, if the color and position are alright,we
will make print Logo sample from silk print factory and take picture for you to comfire before mass production.
Company Information
Contact Info.
Linda
wechat/whatsapp: 008613922805307
skype: asenware.sales.4
email: linda(at)asenware.com