TTL-232R-3V3 USB toL Serial Cable Adapter FTDI Chipset FT232 USB to 3.3v 5vL UART Serial RS232 Download Cable

USB toL Serial Cable Adapter FTDI Chipset FT232 USB TTL Cable6Pin FTDI FT232RL FT232 Module for Arduino USB toL UART Serial Wire Adapter RS232 Download Cable Module LED Indicator
USB toL Serial UART Converter Cable with FTDI Chip Terminated by 6 Way Header, Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More FTDI chip usb to 3.3V 5VL UART serial cable Length: 6ft/1.8Meter
Product Description
Type: Serial Cable FTDI 3V3 cable with the 6-pin headerModel Number: ft232r-ttl-6Pin
This is a USB toL Serial Cable which allows for a simple way to connectL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Brown), TX (Tan-like/Peach), VCC (Red), and GND (Black). A link to the FTDI drivers can be found in the documents section below.
This USB to Serial UART (TTL level) adapter allows you to connect your computer through USB port and use it as a regular serial communication port. All USB protocol is handled within this adapter. There is no other device or programming required.

6 Pin Header Pin AssignmentPin 1 GNDPin 2 CTSPin 3 VCCPin 4 TXDPin 5 RXDPin 6 RTS
FTDI based USB toL Serial Cable are designed using the the standard FT232RL chipset.USB to UART cable with 5VL level UART signals.
6 output wires terminated by a 6 way, 0.1", Single-In-Line (SIL) connector
6 way outputs provide Tx, Rx, RTS#, CTS#, VCC and GND. Data transfer rates from 300 baud to 3 Mbaud atL levels
5V VCC, 3.3V I/O AND 5V I/O
TTL-232R-3V35V VCC-3.3V I/O (signals only, VCC= +5V)
TTL-232R-5V 5V VCC-5V I/O (signals only, VCC= +5V)
DatasheetsTTL-232R
Mfg Application NotesSubmitting Modified Drivers for Windows Hrdw Certification
Drivers Installation Guide for Windows VISTA
Drivers Installation Guide for Windows XP
Device EEPROM Programming Using Vinculum VNC1L
Using the Modem Emulation Mode in VCP DriverProduct Training ModulesUSB Introduction
Environmental InformationRoHS Cert Cables
HTML DatasheetTTL-232R
online Catalog USB UART Series
USBL Serial cable is a range of USB toL serial UART converter cables featuring original and genuine FTDI`s FT232RL USB to serial UART interface IC device which handles all the USB signalling and protocols
Provides a fast, simple way to connect devices with aL level serial interface to USB. Support EEPROM, Vendor ID re-write, debrick Netgear routers and Mprog3.5; Support FTDI VCP driver and D2XX driver
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved
Replace MAX232 type level shifters allowing for direct connection of products to PC via USB
Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in `Product description` by scrolling down this page
Galileo Gen2 Boards Console Serial Cable
ttl-232r-3v3l-232r-5v galileo gen2 board program cable
FT232RL USBL 3.3v 5V adapter cable
FTDI Cable: USB to Serial ,L 3.3V/5V Level
USB UARTL level cable
FTDI FT232RL chip,L-232R_RPi kable
Compatible with FTDIL-232R-3V3 / 5V
UARTL 3.3V 5Vlevel signals
Compatible withL-232R-3V3
Support VCC/TX/RX/CTS/RTS/GND
Support EEPROM, support Vendor ID re-write,support Mprog3.5
Support FTDI VCP driver and D2XX driver
USB UART to 0.1"(2.54mm) 1*6p female housing
Standard pinout: GND (Blk/1), CTS (Brown/2), VCC(red/3), TXD (orange/4), RXD (yellow/5),RTS (Green/6)
26AWG*6C+AL, 1.8m, OD=4.5mm, black
ABS black shell type
PE bag for each cable, 100% test

Package : 1 x usbl uart 6pin cable
Detailed Images
FAQ
Our Services