UV3389 UV adhesive for backlighting led module LED Lamp adhesive

Product Description
SEAYU ® UV3389 is one kind of one-component , high viscosity UV curing adhesive with highthixotropy, It has fast curing, tack free well, high strength and excellent resistance to moistureperformance and suppleness.It is used for glass, metal and part of plastic bonding and sealing.

Properties Uncured

Item Typical Value RangeTest Standard
AppearanceTranslucent fluid
Chemical type Urethane acrylate
Viscosity (mPa.s@25℃)
Brookfield RVT, rotor 5# 7000-15000 GB/T2794-1995
Density (g/cm3 ) 1.1 1.08-1.17 GB/T13354-1992
Curing Performance
Cured by exposure to UV light, light strength is of 100mW/cm 2 .
Tack free time (s) 3 <10
Curing depth (mm@30s) 5
Complete cured energy : >1200mJ/cm 2
Performance Cured
(Cured @ 50mW/cm 2 for 30s)
Physical Properties Typical ValueRange Test Standard
Hardness (Shore D) 60-65 GB/T2411-1980
Tensile strength (MPa)AL/PC >6.5
AL/GLASS>7.8 GB/T1040-2006
PC/PC >5.8

Elongation at break(%) 150 GB/T1040-1992 Water absorption
(%,24h @ 25℃)
Electric PropertiesTypical ValueTest Standard
Dielectric constant (1MHz) 47 GB/T1693-2007
Dielectric loss (1MHz) 0.023GB/T1693-2007
Dielectric strength (KV/mm) 24
Volume resistivity (Ω.cm) 4.6x1015GB1410-1989

1. Name: Adhesive
2. Item: UV3389
3. Standard: MSDS
4. Certification: ISO9001, SGS, TS16749

Product Name
UV Adhesive UV3389
Material
ACRYLATE
Color
Transparency
Standard
MSDS
Density
1.1 g/cm³
Viscocity
7000-15000 mPa.s
Time
3~10s UV curing depth 3mm
Used
Plastic material such as PMMA, good toughness
Products Show
Packing & Delivery
Packing Details : Packing 50ml/PC ,100pcs/box
Delivery Details : 3-15 days after payment
Our Certifications
Best Adhesive
Our company have built a complete quality assurance system and had got the TS16949 and ISO9001 certificate of quality control system.in 2006.

Our Company
Factory
Our Factory
Workshop
Our Workshop
Warehouse
Our Warehouse
Exhibition
Our Exhibition
Our Service
High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.

High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
High quality
Passed the ISO9001:2008 quality system authentication and ROHS authentication.
Customer Photo
Favorable Comment
Best adhesive for Plastic material such as PMMA, good toughness.
Eg: LENS


Storage

Store at 8-28°C,keep away from light and moisture.
Store in original container until ready to use
Shelf life:12 months.

Instructions for Use


The Surface to be bonded should be clean stain oil and dry. The adhesive is applied to the object to be glued joints or protected surface.
Be a wavelength of 365nm UV light irradiation, ultraviolet light can shine through to confirm the adhesion site.
UV curing speed depends on the intensity of the light source and the layer of distance and time required for curing.
After use, shall close the lid immediately.

Notice
Keep far away from children.
Use at well ventilated place is recommoned.
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.
For further information, please refer to MSDS.

FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? Is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below: