Yixing Cleanwater Chemicals Co., Ltd. Business Type:ManufacturerPolyDADMAC
PDADMAC—poly diallyl dimethyl ammonium chloride
Polydadmac sewerage treatment pdadmac dewatering agent
PolyDADMAC PDADMAC ( Equivalent to Magnafloc, Superfloc, 3Chemica)
Description:
This product (technically named Polydimethyl-Dislkelen-Ammonium Chloride) is cationic polymer and it can be completely dissolved in water.
Application Field
1. The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.
2. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.
3. It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.
Specifications:
Appearance
colorless or light yellow colloid
(cps,25°C)
1000~3000
3000-6000
6000-9000
8000-12000
>100000PH (1% water solution)
3.0~6.0
Solid content%
40±1%
Note:our product can be made upon your special request.
Application Method:
1. When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).
2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.
3. The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.
4. It is better to dose the product continuously.
Package and Storage:
1. It is packaged in plastic drums with each containing 50kg and 200kg and 1100kgs
2. Sealed and stored in cool place, avoid solarization
3. This product will appear layer after a long-term storage, but the effect will not be affected with stir.