1. Siemens PLC
2. Siemens touch screen
3. Built-in encoder
4.Built-inanemometer
5.Built-inwind vane
6. Built-in frequency converter (optional according to wind turbine)
7. Display voltage, current, power and other parameters
8. Yaw, cable release, wind speed, wind direction, yaw angledegrees can be set up
9. Support mobile,computer web monitoring (optional wireless monitor module)
10. Adopt the patented design scheme, which saves complicated wiring, installation, debugging convenientProduct PhotoTechnical Parameter
Type
FKJ-GT50KW
FKJ-GT100KW
FKJ-GT200KW
Wind turbine rated power
50KW
100KW
200KW
Wind turbine Max. power
100KW
200KW
300KW
Wind turbine rated voltage
AC400V
AC400V
AC400V
Function
Rectifier,control,DC output,Yaw
Automatic protection function
Over voltage protection, network electric cut off protection, regulated supply output, arrester
Manualfunction
Manual brake, reset, emergency switch
Display mode
LCD
Display content
Wind turbine voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage1
≥560Vdc
≥560Vdc
≥560Vdc
PWM constant voltage2
-----------
≥560Vdc
≥560Vdc
PWM constant voltage3
-----------
-----------
≥560Vdc
wind turbine 3-phase dump load voltage1
580±5Vdc
580±5Vdc
580±5Vdc
three-phase dump load 1 delay time
12-20 min
12-20 min
12-20 min
wind turbine 3-phase dump load voltage2
600±5Vdc
600±5Vdc
600±5Vdc
three-phase dump load2delay time
12-20 min
12-20 min
12-20 min
wind turbine 3-phase dump load voltage3
-----------
600±5Vdc
600±5Vdc
three-phase dump load 3delay time
-----------
12-20 min
12-20 min
PWM dump load fuse
100A
63A*2
63A*3
Fuse of DC output
160A
250A
450A
Connecting wire of the PWM dump load
>20mm²
>15mm²
>15mm²
Connecting wire of the dump load
>12mm²
>16mm²
>20mm²
Workenvironmenttemperature
-30-60°C
Relative humidity
<90% No condensation
Noise(1m)
<40dB
Degree of protection
IP20(Indoor)
Cooling method
Forced air cooling
Communication interface
RS485/USB/GPRS/WIFI/Ethernet(optional)
Temperature compensation
-4mv/°C/2V,-35°C~+80°C,Accuracy:±1°C
Size of the controller(mm)
600*500*1200mm
600*500*1200mm
600*500*1200mm
Weight of the controller
94Kg
96Kg
96Kg
Size of the dump load(mm)
720*500*1300
720*500*1300(2pcs)
720*500*1300(2pcs)
Weight of the dump load
107Kg
107Kg*2
107Kg*2
*Above parameter only for reference. Could be custom made to user specifications.
50KW Wind Turbine Charge Controller for On Grid SystemAfter-Sales Service
Service guarantee As our corporate users, you enjoy the following service:
(1) The machine warranty for free in 2 year;
(2) Technical support;
(3) Within 24 hours for respond after receiving notification;
(4) Cost maintenance forever. When you confirm the failure of equipment, please promptly contact us and provide the equipment model and complete description of the problem.
However, any of the following situation happened, are not included in the warranty:
(1) Non-permitted by the company, went ahead with repair and damage;
(2) Install or modify arbitrarily;
(3) Incorrect operation or use;
(4) Do not depending on the manual to do cleaning or maintenance;
(5) Abnormal environment condition exceed the specifications, result in damage;
(6) The deliberate destruction of man-made;
(7) Irresistible natural disasters.
50KW Wind Turbine Charge Controller for On Grid System
Payment Term
50KW Wind Turbine Charge Controller for On Grid SystemCompany Information
50KW Wind Turbine Charge Controller for On Grid System
more products
50KW Wind Turbine Charge Controller for On Grid System