UC100-1V1S1O is a multi-functional gateway, which integrates voice service(PSTN and VoLTE) and data service(LTE 4G/WCDMA 3G). It provides three voice interfaces (including LTE, FXS and FXO), offering seamless connectivity to VoIP Network, PLMN and PSTN. based on SIP, it not only can interacts with VoIP network, but also supports types of GSM/WCDMA/LTE frequency ranges, thus meeting the worldwide requirements about the mobile network. UC100 supports WiFi and has high-speed data-handling capacity, allowing users to enjoy high-speed internet surfing through WiFi or the LAN port.
Features:
FXS/FXO/GSM/VoLTE interface on a single device
Send/receive calls from PSTN/PLMN via FXO/GSM/LTE
Flexible dial plan, via time, numbers, source IP etc.
IVR customization
High speed NAT forwarding, support WIFI hotspot
Built-in SIP server, support up to 32 SIP Extensions
User-friendly web interface, multiple management ways
Physical Interfaces
FXS Port: 1
FXO Port: 1
SIM Slot: 1
Ethernet Interfaces
1WAN&3LAN 10/100 base-T RJ45
WIFI
2.4GHz 802.11b/g/n,2T2R
FXS
Connector: RJ11
Caller ID: Bellcore Type 1&2, ETSI,BT,NTT and DTMF
Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone
Polarity Reversal
Hook Flash
Voice Capabilities
VoIP Protocols: SIP over UDP/TCP/TLS,SDP,RTP/SRTP
Codecs: G.711a/μ law,G.723.1, G.729A/B, iLBC,G.726
Silence Suppression
Comfort Noise Generator(CNG)
Voice Activity Detection(VAD)
Echo Cancellation: G.168 with up to 128ms
Dynamic Jitter Buffer
Adjustable Gain Control
Automatic Gain Control (AGC)
Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
FAX: T.38 and Pass-through
NAT: STUN/UPnP
DTMF: RFC2833/SIP Info/In-band
FXO
Connector: RJ11
Caller ID: FSK, DTMF
Polarity Reversal
Answer Delay
Busy Tone Detection
No Current Detection
Software Features
Ring Group
Routing Groups
Caller/Called Number Manipulation
Routing base on Time Period
Routing base on Caller/Called Prefixes
Routing base on Source Trunks
Dial Rules
Failover Routing
FXO Impedance Auto Match
IVR Customization
Auto Attendant Function
CDRs