Hdpe Reinforced Pond Liner Hdpe Geomembrane Liner Pond Liner

Customized size high anti-seepage hdpe reinforced pond geomembrane linerProduct Description Product performance1. High anti-seepage coefficient
2. Chemical stability
3. Anti-aging performance
4. Good economic benefits
5. Construction speed is fast
6. Environmentally friendly and non-toxicApplication field1. Environmental protection
2. Water conservancy
3. Aquaculture industry
4. Garden
5. Chemical plant, refinery
6. Mining
7. Transportation facilities
8. Agriculture
9. Subway, planting roof, sewage pipe
10. Salt film, salt pool crystallization poolGlossy geomembrane introduction
Glossy HDPE geomembrane is a geomembrane product with a smooth surface on both sides. It is made of high quality high density polyethylene material, which is made of a combination of about 97.5% polyethylene,
2.5% carbon black, a trace amount of antioxidant and heat stabilizer.
The resin used in the production process is specially designed for geomembrane. Applied raw polyethylene resin raw materialsRough geomembrane introduction
The single-faced HDPE geomembrane is a geomembrane product that forms a matte surface by nitrogen pressure jetting on the basis of a glossy geomembrane. This process is the only way to produce a matte geomembrane without significantly reducing any of its physical properties. The geomembrane product is made of high quality high density polyethylene material,
which is made of a combination of about 97.5% polyethylene,
2.5% carbon black, a trace amount of antioxidant and heat stabilizer. The resin used in the production process is designed for The raw polyethylene resin raw material actually prepared by the geomembrane application. No.indextest value0.75mm1.00mm1.25mm1.50mm2.00mm2.50mm3.00mm1Minimum density(g/cm²)0.932Yield Strength,N/min11151822293744Breaking strength,N/min20273340536780Yield elongation ratio12Breaking elongation ratio7003Right angle tear strength,N931251561872493113744Piercing strength,N2403204004806408009605Resistant to environmental stress cracking,hr3006Carbon blackCarbon black content,%2.0-3.0Carbon black dispersionNine of the ten observation areas should belong to Stage 1 or Stage 2, and Stage 3 should not be more than one.7Oxidation induction timeStandard OIT,(min)100High pressure OIT,(min)400885 baking aging(Min average)After baking 90d,Standard OIT %55Baking 90d,High pressure OIT %809UV resistance
Ultraviolet radiation 1600h,
Standard OIT %50
Ultraviolet radiation 1600h,
High pressure OIT %5010-70 Low temperature shock enchantment performancePass through11Water vapor permeability coefficient≤1.0*10-1312Dimensional stability±2Product displayCertificatePackaging & Shipping

Contact us


Customized size high anti-seepage hdpe reinforced pond geomembrane liner