Steel Billets

Steel billet is a length of metal that has a round or square cross section with an area less than 36sqin (230cm2). Steel billets are created directly via continuous casting or extrusion or indirectly via rolling an ingot. Steel billets are further processed via profile rolling and drawing, final products include bars and wires.
Steel billets are manufactured under strict quality controls to ensure consistency and conformity to local and international standards. Our steel billets are conforms to the major world standards and the London metal Exchange contract specifications.
MECHANICAL PROPERTIES
Conforming to customer's requirement and as per ASTM, BS, TSE, DIN, JIS, ISO, EN, SAE, AFNOR, UNI, GOSTPRODUCT IDENTIFICATION
Billets are identified by color coding across section surface of each billet with reference of heat number and grade.TEST CERTIFICATE
Test certificates are issued from International, in accordance with product specification as required by the customer.PRODUCT APPLICATIONS
The carbon & alloy steel products have extensive application in automotive, engineering and forging industries.SIZE 80 mm x 80 mm
100 mm x 100 mm
110 mm x 110 mm
120 mm x 120 mm
125 mm x 125 mm
130 mm x 130 mm
140 mm x 140 mm
150 mm x 150 mm
160 mm x 160 mm
180 mm x 180 mm
200 mm x 200 mm
LENGTH Available up to 15 m, shipment by 20 feet container or break bulk 20 feet container, length should be 5.8 MT break bulk up to 12 MT
QUALITY
In different international standards including 3SP/PS, 5SP/PS, ASTM A 615 GR40, ASTM A 615 GR60, ASTM A 615 GR75, ASTM A 706, ASTM A 572 GR50, IS 2830, JIS 3101, JISO 3112:1985, NFA 35-16:1986, SS400, ASTM-36, DIN 17100 ST 37.2, TS 708, BS-4360, BS 4449.Q 235, Q237, Q257, SAE J 403, SAE 1006, SAE 1008, SAE 1010, SAE 1015, SAE 1020, SAE 1025, SAE 1030, SAE 1035, SAE 1040, SAE 1045, SAE 1050, SAE 1060, EN 10025, S235JR, S255JR, S275JR, E295, E335, E360, ST 37-2, ST 50-2, ST 52-3, ST 60-2, ST 70-2, RST 44-2, STAS 438 PC 52, BS B500B, BS BG460B, CK15, CK30, CK45, CK60, BST 500 S, S 400, S 400 W, S235JR, S275JR, GOST 1050-88, GOST 4543-71, DIN EN 10025-1:2005, DIN EN 10025-2:2005, DIN EN 10083-2:2006, DIN EN 10083-3:2007
QUALITY AND QUANTITY CERTIFICATES Mills quality certificate confirming the chemical analysis as per heat number Mills quantity certificate Non Radiation certificate issued by the relevantauthorities
TOLERANCES Thickness (a) +/- 4.0mm (+/- 3%) Width (a) +/- 4.0mm (+/-3%) Length (L) 5.9/6.0m (+/-100mm)(min 5.8/max 6.1) Camber (one-side) 1% (per total length) Camber (two-sides) 1% (per total length) Rhomboid 2% max Transverse concavity +/- 2.45mm (+/- 1.5%) Cut angle tolerance 8mm Twist: No more than 3 degrees per 1 m length Corner radius 8-25mm max End bend 20mm max for first 500mm