Lab Use Nitrogen Gas Generator

Lab Use Nitrogen Gas Generator
1 Food Nitrogen Making Machine Specification
Item
Technical parameter
Remarks
Model No.
PNM39-250-5
Nitrogen index
Purity
≥99.9%
Ave flow
≥250 Nm3/h
20°C,101.325Kpa
Pressure
≥5 bars
Gauge pressure
Dew point
≤-40°C
Normal pressure
Noise
≤80 Db(A)
One meter from equipment
Lab use mini nitrogen generator specification: Nitrogen purity
≥99.5%
Oxygen content ≤0.5%Nitrogen flow rate
≥25 L/min
20℃, 101.325KpaNitrogen outlet pressure
≥450-620 kPa
See notePower supply
24V
DCStart up time
≤15 minutes
Time to get 99.5% purityCertificates
CE, CSA
customer's property, not distributableNoise
≤72 Db(A)
One meter from equipmentWeight
≤160 Kg
With packageDimension
850 x920 x 1100 mm
With packagePackage
1 carton on 1 plywood pallet
2 Food Nitrogen Making Machine Principle
3 Nitrogen Making Machine Structure
4 Nitrogen Making Machine Features
4.1 Skid structure, easy installation.
When nitrogen gas plant reaches site, just connect the air compressor into main machine, then with one simple touch on the start, the whole machine starts to work, no need for site installation, site training,etc. No need for Gamma engineers go to site, further saving customer’s cost.
4.2 Special filling device
Making the fill of molecular sieve achieve max density and evenness. Getting rid of molecular sieve creeping and wearing and “tunnel effect” from the root. Therefore the molecular sieve has longer lifetime, higher utility ratio and lower material air consumption.
4.3 Special gas distributors
Equipped at both top and bottom side of the adsorption tower
adapting multi-layer hole plate structure and special hole arrangement. These makes gas distribution within tower more efficient.
4.4 Pipeline flow speed control technology
Making the molecular sieve avoid damage caused by collision by “boiling” at the top of adsorption tower, no need extra pressing device.
4.5 Advanced middle bed layer pressure balancing process
Can be regarded as a four tower structure with series connection of pre-adsorption stage and clean adsorption stage, achieving higher purity nitrogen.
5 Packing and shipping
6 Warranty
Should any trouble happened within one year, Gamma sends parts free of charge. If necessary, Gamma engineer comes to site at our own cost.
7 Certification
8 Gamma factory