Industrial Dust smoke collector mobile portable welding fume extractor

Industrial Dust smoke collector mobile portable welding fume extractor
The welding fume extractors are used for dust collection , fume filtration and air purification during the welding, polishing, cutting, grinding process. it also can be used for recycling of rare metals and precious materials, etc.
Working principle:
Through the wind suction force , the dust and fume are sucked into the equipment through the suction hose, the spark is blocked by the flame arrester in the inlet .
The fume and dust are sucked into gravity separator, and then the bigger particles firstly descend into dust bag.The small dust particles were trapped in the outer surface of the filter. Clean air will be filtrate by HEPA PTFE Cartridge Filter, then enter into the clean room and exhaust outside by the standard discharge .
Specification : ModelAir Flow (m3/h )Filter Area (m2)Motor power(kw)Suction ArmCleaning typeFilter PrecisionSize (m)GJ1811800151.11Manual99.90%0.5*0.5*1.1GJ3013000202.21Manual99.90%0.6*0.7*1.1GJ3023000202.22Manual99.90%0.6*0.7*1.1GJ35235002532Manual99.90%0.6*0.7*1.1GZ1811800151.11Auto pulse cleaning99.90%0.65*0.7*1.3GZ3013000202.21Auto pulse cleaning99.90%0.65*0.7*1.3GZ35135002531Auto pulse cleaning99.90%0.65*0.7*1.35GZ35235002532Auto pulse cleaning99.90%0.65*0.7*1.35GZ40240003042Auto pulse cleaning99.90%0.7*0.7*1.4GZ5025000405.52Auto pulse cleaning99.90%0.85* 1* 1.7
Advantage :
1. With large air volume, low noise and better capture effect
2. Filter cleaning type: Automatic blowback cleaning system.
3. Suction arm uses temperature-resistant, flame retardant and wear-resistant composite materials , Can be rotated 360 °, flexible and adjustable .
4. With three layer filter system and HEPA PTFE Cartridge Filter to ensure 99.99% filtration efficiency
5. short-circuit , high temperature and overload protection