Voip Product

Company Information
HyberTone Technology Limited
In general, a VoIP gateway allows voice communications between a VoIP network and another phone network. The built-in phone interface determines which phone network is supported. There are three types of common interfaces: FXS, FXO, GSM. A FXS interface enables connection to a traditional telephone terminal or a PBX FXO port. This type of VoIP gateway is generally referred as FXS gateway. FXO interface enables connection to a PSTN line or a PBX extension port. This type of VoIP gateway is referred as FXO gateway. GSM interface enable voice connection directly to a GSM network. This type of gateway is generally referred as GSM gateway. In particular, we calls it “GoIP”.
HyberTone is specialized in VoIP products, especially GoIPs. We design, develop, manufacture, and sell our products directly and via distributors to customers. Our GoIP models now cover 1, 4, 8, 16, and 32-channel in order to meet the wide range of market demands. All our products are priced very attractively and probably the lowest in the market. Because of the price and performance, GoIPs have been widely adopted by system integrators, VoIP service providers, and many other business and individual users. Product Overviews
Product Name: 16 Channels 16 SIMs GSM Gateway
Model Name: GoIP-16
Specification:
1. 16 GSM channels,up to 16 sim cards
2. Quad band ,IMEI changeable
3. Support of SMB32 SIM Bank
4. VoIP SIP,H323,Remote Access
5. Optional SMS termination
6. Easy to install and administrate
7. Auto Balance and Recharge
8. Auto BTS changeable
Series Model:GoIP-1,GoIP-4,GoIP-8,GoIP-16,GoIP-32
Our GoIPs come with all the common network, VoIP, and GSM features and they have been widely tested for compatibility, stability, and reliability. In addition, we’ve developed our proprietary Remote SIM technology for SIM card management without inserting SIM cards to GoIPs. Together with the SMS Server and SIM Sever, you can now build your own system for voice traffics between VoIP and GSM or a SMS Messaging system based on your application requirements. In addition, each GoIP is equipped with a Remote Control client which enables a secure remote access method for technical support and GoIP management. All of the above features are available at no additional charges.Product Description
Key Features
Call from VoIP to GSM or GSM to VoIP
Bulk SMS
Auto check balance and recharge
Remote SIM Control
Outbound call from voip
Inbound call from gsm
Remote management
Software Features
VoIP Protocols: SIP V2, H.323 V4
Audio Codecs: g711(alaw/ulaw), g729, g723.1
DTMF format: SIP INFO, RFC2833, Inband
Packet Loss Concealment
Programmable Jitter Buffer: Fixed, Dynamic, Adaptive
Network Connection: DHCP, PPPOE, Static IP
STUN Server
Support English, Chinese
Support Signaling encryption
Support media encryption
Support Media NAT Traversal
Support Remote control
Hardware Features
GSM Channels:16
Power Adapter: DC 12V/4A
CPU: ARM11/700MHz
RAM: 128MB
Flash: 8M
GSM Frequency: 850/900/1800/1900MHz
Max power consumption: 30W
Weight: 3KG (Including AC/DC Adapter)
Size: 42cm*23cm*11cm (with short antennas)
42cm*23cm*16cm (with long antennas)
Operating Temperature: 0 - 45℃
Working Humidity: 10% - 90% non condensation

Connections
The concept diagram below shows a simple VoIP network for call center application. It consists of a softswitch/IP PBX and VoIP clients such as an IP phone, a call center operator, and GoIPs. All VoIP clients are configured to register to the softswitch/IP PBX. For the GoIPs, each GSM channel is inserted with a valid SIM card in order to access the GSM network. Both incoming and outgoing calls between the VoIP and GSM/PSTN networks can now be realized. Detailed ImagesGoIP Applications
1: Call Origination And Termination for VoIP Traffic
Notes:
1. Call Origination refers to a call initiated from the PSTN or cell phone network is terminated using VoIP.
2. Call Termination refers to a call initiated as a VoIP call is terminated using PSTN or cell phone network.
3. As shown in the network topology diagram, a VoIP Service Provider is using GoIPs as call origination and termination devices.
- A call dialed to a GoIP (right hand side) via GSM is first routed via VoIP and then terminated via a VoIP end point or VoIP Service Provider.
- A VoIP call originated from the left hand side is routed to a GoIP on the right hand side and then is dialed out as a GSM call.
2: IP PBX Call Origination and Termination
Notes:
1. Instead of FXO gateways, GoIPs are as a call termination and origination device for the IP PBX as shown in the diagram above.
2. VoIP endpoints connected to the IP PBX can make calls to cellular/traditional telephone network via the GoIP GSM ports.
3. Outside callers can then call in via the GoIP GSM ports to reach any of the VoIP endpoints that are registered to the IP PBX.
4. GoIPs can be configured in a group mode such that all GSM ports can be used by just dialing only one GSM number.
Please refer to the Call Center Application for more information.
3: Inbound Call Centre for Customer Service
Notes:
1. Inbound call centre is operated by a company to administer incoming product support or information inquiries from consumers.
2. This application requires customers to call in via a single phone number. Each GSM channel in a GoIP has its own phone number.
In order to achieve calling in via a single number, GoIPs must be configured in a phone group mode with one GoIP as a host and the others as clients.
3. An incoming call to the host GoIP is automatically forwarded to an idle GSM channel in the phone group. The call is then routed to a call attendant via a VoIP connection.
4. Key advantages: quick setup, scalable, portable, low system cost, low operating cost especially used in cellular network no charge on incoming calls.4: Outbound Call Centre for Telemarketing/Solicitation
Notes:
1. Outbound call centers are normally operated for telemarketing, solicitation of charitable or political donations, and debt collection etc.
2. In this application, only outgoing calls are made. GoIPs could be configured as SIP clients to registering to the SIP server/IP PBX or as a SIP Trunk to accept calls routed from the SIP Server/IP PBX.
3. Key advantages: quick setup, portable, scalable, low system cost, low operating cost.
5: Call Back Service
Notes:
1. Call Back is referring to the telecommunications event that occurs when the originator of a call is immediately called back in a second call as a response.
2. GoIP could be used to achieve this function alone or as an terminal that is integrated in an existing call back server/platform.
3. For standalone operation,GoIP receives a call with caller ID information and then rejects the call immediately without answering the call.GoIP then calls back the caller so that he can dial a phone number to make a call.In this case,GoIP must register to a VoIP Service Provider who can offer terminate the call.
4. In a call back system,GoIP acts as a device to initiate the call back function.Typically, this is done in two ways.The first method is to send an SMS with the callee’s phone number to the GoIP.The GoIP then sends both the caller's and callee's phone numbers to the call back server to complete the call back function.The second method is to call the GoIP and the hang up (with the call being answered).GoIP sends the caller’s phone number to the call back server and the call back server calls the caller directly so that the caller can then dial a phone number to make a call.
6: Sending Bulk SMS Service
Notes:
1. Sending bulk sms text messages is a common technique for telemarketing to reach the target customers.
2. A bulk SMS system can be implemented quickly and easily using GoIPs and our proprietary SMS server.Telemarketers are now have full control on how and when they want to send text messages.
3. In addition, SMS text messages are now used widely in many companies, organizations, schools, clubs as a mean for broadcasting information. They can now build their own SMS system without paying expensive charges to their GSM server provider.
4. This system can also take the advantage of using the same GSM service provider to send sms to the phone subscribers in the same service provider. Packaging & Shipping
Trade TermsFOB HONGKONGPayment TermsT/T,Western Union,Paypal,Alibaba online,CashPayment Condition100% deposit in advanceDelivery Time1-3 days after Receiving PaymentPackingStrong Carton BoxShippingUPS,EMS,DHL,ARAMEX and BRE Our Service
1. Hybertone is a professional developer and manufacturer of voip products. We provides GSM/WCDMA/4G LTE/FXS gateway and solutions. And we also offer customized products and OEM service.

2. We always focus on long-term cooperation with our customers. Your needs are our priority. Your 100% satisfaction with our products and services are our lasting pursuit.

3. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in communication industry and other industries.

4. Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs.

5. What's more,we provide best before and after sales services,online tech support and one year warranty.

6.Our gateways supports API interface,we provide free software(sms server,sim server,relay server and remote control server.)
Contact UsWelcome to inquire!
Katty Huang
HYBERTONE TECHNOLOGY LIMITED
Mobile/SKYPE: 0086-15989425616
Web: www.hybertone.com
Address:Room 5B,Aozhihao Integrated Building,XinZhou 4TH Street,Futian District,Shenzhen China Go to homepage