Product Feature
High Voltage 12Vdc-900V dc Contactor Relay 200A High Load Current Electric Control China Supply
Product features:1.Controllable DC high current high voltage2.Compact structure, low working noise3.High safety4.Contact reliability is high5.No special requirement for installation6.Use diversity
Product Characteristics:
1,High current and voltage controlling This product is sealed with epoxy resin and filled with inert gas in the contact chamber. Combined with magnetic quenching, it is subjected to high current and high voltage.2,Compact structure & low noiseThe shape is small because of using an arc-free gap structure that does not allow the arc to leak.The structure in which the contacts are sealed in the inert gas compartment.Efficient and safe shut-off is ensured even if the contact gap is small.Low noise at work, as well as switching high currents.3,Excellent safety performanceThe contact is sealed in the sealed compartment,thus arc can't be released which ensuring good safety of the product.4,Excellent reliability Sealed with inert gas,the contact resistance remains stable regardless of the environment. It is also dustproof and waterproof .5,No special requirement for installation.The moving part is light,but with huge counter-force.Barely affect by gravity. So there is no special requirement for installation position.6,Multifunctional purposes Application includes:battery switch, backup equipment, DC voltage power controlling and circuit safety protection device etc.,7,Conforms with EU RoHS Instruction (2002/95/EC)
Detailed Image
EVQ200specification
Charging Pile Device Control 200A DC Contactor Relay High Voltage 250Vdc-900Vdc
Working voltage range at 20℃
Pull in Voltage at 20℃
Sustaining voltage at 20℃
Release voltage at 20℃
Maximum start up current
[rated voltage]
at 20℃
Rated coil resistance [±5%]at20℃
Average holding current
at 20℃
Energy-saving circuit board
Coil polarity
12-36Vdc
9VdcMax.
7.5VdcMin.
6Vdc
Min..
3.8A
3.14Ω
0.13A (at 12Vdc)0.07A (at 24Vdc)
√
√
48-72Vdc
32VdcMax.
22VdcMin
18VdcMin.
1.3A
40Ω
0.03A(at 48Vdc)
√
√
2.Functional Parameters
Types
Name
Contactor
Type of main contactor system
Bridge-form operation(SPST-NO-DM)
Current type
(DC)
Media type when cutting-off
Inactive gas
Operation method
Power-driven
Rating operation system
Uninterrupted
Rated value and limited value on main contactor
Contact polarity
With polar
√
Without polar
√
Rated operation voltage (Ue)
12-900Vdc
Rated operation current
200A (▲2)
Rating short-time tolerance current and duration time
300A 900ec.
Maximum cutiting-off voltage( one-time permitted)
400A 200Vdc
Connecting resistance on contactor(initial )
1mΩ Max.(at 1A)
operating time(at 20℃)
25ms Max.(▲3)
Bounce time(at 20℃)
7ms Max.(▲3)
Release time(at 20℃)
12ms Max.(▲4)
Operation life time
Machinery life time
1x10^5(▲5)
Electricity life time(▲2,▲4)
With polar
See graph-1
Without polar
See graph-2
Dielectric function parameter
Insulation resistance
Initial stage:100MΩ Min.(▲1)
Rated impulse withstand voltage(initial)
Main contact
AC 2500 Vrms/1mA/1min.(latitude)
Main contactor and coil interface
AC 2500 Vrms/1mA/1min.(latitude)
Machinery function
Impulse
20Gpeak value,11ms 1/2sinusoid(coil power setup)
Vibration
20Gpeak value,80~2,000Hz,sinusoid
Coil parameter
Rated operation voltage scope
12Vdc,24Vdc
Coil polar
√
Power-saving circuit board
√
Assistant contactor(▲6)
√
Environmental parameter
Use and storage the environmental temperature scope
-40℃~+85℃
Use and storage the environmental humidity scope
5%~95% RH.
weight
430±5g
Safety rules and quality management system
CE,CCC
▲1:measure the voltageDC500V,the testing position is as same as dielectric withstanding voltage▲2:loading category:DC-1,L/R millisecond ▲3:enforce the rated operation voltage on coil, involves the contactor will bounce.▲4:enforce the rated operation voltage on coil, without diode.▲5:rated controlling capacity, transforming frequency, connceting and cutting-off ,ON : OFF=0.5second: 0.5second
▲6:assistant contactor parameter:2A@30VDC/3A@125VAC,600Vac 50/60Hz 1min
3.Reference data
4.Size table
5.Installation size
Application
Company & qualify
Other products
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 3-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Name: Kim Zheng Email: kimzheng @sz-kyxny.comWhatsapp:+8613519821890Webchat:+861351981890Skype:kim031537