Supplier Homepage Machinery, Industrial Parts & Tools Tools & Hardware Hardware Other Hardware G01-30 type injection cutting torch

G01-30 type injection cutting torch pictures & photos

G01-30 type injection cutting torch

Get Latest Price

Min. Order / Reference FOB Price
10 Pieces	US $7.00/ Pieces

Local Area:	Linyi, Shandong, China
R&D Capacity:	OEM, ODM, Other
Payment Terms:	LC, T/T, D/P, Paypal, Western Union

Brand:	LISHAN
Material:	Copper, copper
Finish:	OTHER
Type:	g01-30

Contact Now Request Sample Customized Request

Favorites

Product Description

Customer Question & Answer

Ask something for more details

(0)

Safe operation
Cutting torch and welding torch are important tools for gas welders. If not used properly, it may cause fire, backfiring, even combustion and explosion accidents.Therefore, the following matters should be paid attention to during the use:
1. According to the size of welding torch and cutting torch nozzle, the pressure and gas quantity of oxygen and acetylene should be equipped.
2. The nozzle and the metal plate should not touch each other.
3. Check gaskets and valves for air leakage.
4. If the nozzle is blocked, remove the nozzle and dredge it from the inside out.
5. Before use, the air in the rubber tube should be discharged, and then open the oxygen and acetylene valves respectively, unblocked before ignition test welding.
6. The parts of welding torch and cutting torch shall not be stained with grease.
7. The nozzle heat of welding torch and cutting torch should not be too hot. If it is too hot, water should be used to cool it.
8. When lighting, the acetylene valve should be opened first and oxygen should be opened after lighting.The aim is to release acetylene - air mixture to facilitate ignition and check whether acetylene is smooth.
9. Acetylene and oxygen valves should be repaired in time in case of air leakage.
10. The nozzle of the burning cutting torch or welding torch shall not be placed on the workpiece or the ground.
11. When leaving the work station, it is forbidden to place the lighted welding torch and cutting torch on the operating table.
12. Close the valve of the oxygen and tempering preventer during shift shift or when welding cutting is stopped.
13 rubber tube to special, marked so as to distinguish, acetylene tube and oxygen tube can not be used in exchange.
14. When rubber tube is found frozen, apply warm water or hot steam to thaw, do not use fire to bake, not to use oxygen to blow acetylene pipe.
15 oxygen, acetylene rubber tube, do not put casually, do not stick to the pipe mouth on the ground, so as to avoid filling soil and impurities, blockage.