1kw 1.5kw 2kw 3kw Small Wind solar hybrid generators Alternative off grid/on grid

Product DetailsWind turbine generator:1) Pretty quiet, very very low noise . 2) Good output, our blades and motor is slightly bigger than competitors. 3) Safety in strong wind conditions.Other highlights like low vibration construction; truly marine anti-corrosion, simple installation and durable.

Product IntroductionMain features and superiority1. Aerodynamic body desigh: light weight, high strength, anti-corrosion in marine condition and durable. All body has powder coating finish.2. Unique design slip ring: stand 200A instant current, can turn the body to the wind direction and get high efficiency3. Double bearing technology: allow the wind turbine to produce power eariler and reduce vibration.4. Carbon fiber blades: using fluid dynamics and aerodyamics on material, low start up wind speed and protection in strong wind.

Product ParametersModel nameIDEAL 2000Wind turbine typeHorizontal axis, up-windRotor diameter1900mmNet weight24.5kgTower diameter 49-60mm Blades number5Blades materialCaron fiber reinforced plasticBlades mass660g/pcsBody materialAluminum high pressure diecast Body constructionCompletely oneProduct finishClamp-based Thermosettmg powder coatingTower connection bolt-on clamp or flange connection Start up wind speed1.8m/sCut in wind speed2.5m/sSurvival wind speed50m/sRated power1.5KW(13m/s)Rated rotor speed750rpmMaximum power2000W(20m/s)Working temp. rangefrom -40℃ to 60℃ Product life (years)15The sound pressure level LAeq 35dB @ 5m/s @ 5m behind rotor (an air density of 1,225 kg/m³) GeneratorSynchronous-type, three-phase power generator with neodymium iron boron magnetsRated output voltageOff grid 12V or 24V Braking systemElectro-magnetic & blade over speed aerodynamic braking system Yaw control360 degree free yaw Direction controlTail tracingControl systemBrake mode/ safety control Recommended system Off grid: deep cycle lead acid batteryNote: At cut-in wind speed, it produces power, but it requires higher wind speed to charge battery or transfer to gridProduct Details ShowWhy Choose UsAdvantages we have: A. Experienced supplier;B. Professional design team and sales department for your service;C. Alibaba golden supplier, factory recognized by 'CE/ISO9001' and so on;D. 7/24 service for you, all the question will be dealt within 24hours.The benefit you get:A. Stable quality ——Coming from good materials and technic;B. Lower price——Not cheapest but the lowest at the same quality;C. Good service——Satisfactory service before and after sale;D. Delivery time——2-5 days.

Packing and Deliveryabout shipment1.Sample service: Samples available upon request, 3~10 2.Experience: We have 12 years professional design and manufacture experience in this line. Rich experience to work with famous companies and brands. Besides, we know products, customer's need and markets well.3.R&D: We have own designers, keep developing new styles every season4.Quality control: Experienced and strict inspection QC team. We do in-line inspection and final inspection for every order.

FAQ1. How about noise of this wind generator?
The sources of sounds emitted from operating wind turbines can be divided into two categories:
1) Mechanical sounds, from the interaction of turbine components.
2) Aerodynamic sounds, produced by the flow of air over the blades.
Our mechanical design, like double bearings; front-back faces; exceptional blades assemble and anti-vibration plastic pad connection with pole, blades design and materials, all these contribute to make IDEAL400 the quietest wind turbine in the world.
2. Is it anti-corrosion in marine condition?
The body is made of a lightweight magnesium and aluminum alloy, and coated with a marine-grade polymer powder coat to prevent oxidation or corrosion.
Our latest study found that in order to anti corrosion for a long time, we follow these steps:
(1)Surface polishing
(2) Zinc-aluminum coating treatment
Zinc-aluminum coating is composed of ultrafine zinc and ultrafine aluminum and none-chrome mental salt, it is a non-electrolytic inorganic coatings. After the treatment, the coating form an anti-corrosion surface of inorganic zinc sheets and aluminum flake. No organic solvents, non-toxic metals (such as nickel, lead, barium and mercury) and Cr, so more environment friendly.
(3)Sandblasted
(4) Using two layers of epoxy powder painting. Most manufacturers adapt single epoxy powder coating , a thin layer painting, surface porosity, or painted surfaces damaged during installation, these will lead to corrosion, our double epoxy coating is approved to be a good solution to this corrosion issue.3. Why we use 3 blades in this IDEAL400, IDEAL600 wind generator, and 5 blades for IDEAL2000 wind generator ?
Many scientific experiments show that 3 blades and 5 blades wind generator have a good wind power coefficient. For small size wind turbine, as it is relative high rotate generator, thus in order to get a good output in high wind conditions, we use 3 blades for IDEAL400 and IDEAL600. Besides, three blades wind turbine enjoy a better rotate balance, and output power is more reliable.

Our companyNewmeil established in 2010. We mainly research and develop new energy products. Wind generators, stove fans and solar pool ionizers are all our prior introduced. We have our own factories equiped with professional and rich experienced designers and workers. All our products are produced by the most advanced technology and upgrade material. We have been selling our products to all over the world and we have achieved great reputation.If you have any interest, to cooperate, welcome to Newmeil. We definitely will not let you down.

Our strength1.Sample service: Samples available upon request, 3~10 days lead time2.Experience: We have 12 years professional design and manufacture experience in this line. Rich experience to work with famous companies and brands. Besides, we know products, customer's need and markets well.3.R&D: We have own designers, keep developing new styles every season4.Quality control: Experienced and strict inspection QC team. We do in-line inspection and final inspection for every order.