full automatic face mask making machine

Product Description
1 Finished mask specifications: adult 175 * 95MM 2 production speed: about 90-110 pcs / min 3 Equipment composition: mask machine slicing, mask connecting line and mask outer ear strap machine to form one drag two automatic disposable three-layer mask machine production line. 4 machine size： 7100MM*3000MM*780MM 5 Power supply： AC single item 220V or 3-phase 380V, 50HZ, 9KW Air source pressure: 0.6-0.7MPA / CM²
Equipment Introduction
A type of flat face mask. Disposable three-layer masks are made of two layers of non-woven fabric and filter paper.The hood is made of two layers of fiber non-woven fabrics, which are professionally used for medical treatment, and a layer is added in the middle to filter and prevent bacteria.
Fully automatic one-to-two plane mask production system realizes automatic production of medical masks, mainly including coil material feeding and folding Pressing, nose bridge tendon feeding, mask forming, mask cutting, ear band feeding and welding, finished product blanking, etc.


From raw materials to the finished mask.
Raw Materials
2 One layer is added in the middle to filter and prevent bacteria
Main Features
Technical Parameters
3 Non-woven outer layer (175MM, weight about 25G), PP non-woven composite fiber;The middle layer is a meltblown cloth (170-200MM, the weight is about 25G);Non-woven inner layer (190-200MM, weight 25G), PP non-woven composite fiber;Nose bridge silk plastic strip PP 5.0MM * 0.55MM;Earband is round with a diameter of 2.5-3MM;

After sales service




The seller is responsible for sending the equipment to the buyer's factory and completing the installation and commissioning of the equipment. If there is a problem during commissioning, the seller is responsible for solving the problem.The buyer must comply with the relevant regulations of the seller's installation site





2 After the equipment is shipped to the buyer, the equipment is placed in the designated area by the buyer.Then the all equipment is corrected by the seller's staff. With the buyer providing the debugging materials, the installation and commissioning are completed within two days;




3 After the installation and commissioning of the equipment is completed, the seller provides technical handover and operation maintenance training to the buyer's.The equipment can be operated and used only after passing the training;
4 The seller provides free training for relevant personnel of the buyer. Include:


Equipment assembly training—Training of equipment personnel for the assembly and maintenance of equipment. Usually, when the mechanical assembly is performed, the buyer sends an engineer to the manufacturer to master the basic specifications, composition, characteristics, etc.



Mass production training-training on handling various issues during mass production. Personnel usually conduct weekly follow-up training at the site, including normal use of equipment, maintenance, fault analysis and elimination, operational safety and emergency procedures.



5 Equipment after-sales service:




The warranty period of the equipment is 6 months from the date of the formal acceptance of the equipment. When a failure caused by our company's responsibility occurs, our company will provide free warranty and parts delivery (for conditions not explicitly stated in the specification, this restriction is not limited





Within five years after the expiration of the warranty period. The seller shall still be responsible for the repair and maintenance of the equipment, but only a reasonable working time and reasonable transportation costs will be charged, which involves the replacement and purchase of equipment-related accessories, and the seller only charges the cost of the accessories.