Business Type:
Manufacturer/Factory
Business Range:
Ceiling Access Point, Inwall Access Point, Outdoor CPE, AC Controller, Wireless Router
Establishment:
2013
R&D Capacity:
OEM, ODM, Others
Terms of Payment:
LC, T/T, D/P, Paypal, Western Union
Main Markets:
Domestic Market, Mid East, Eastern Europe
OEM/ODM Service
Sample Available

Shenzhen Yunlink Technology Co., Ltd. is a professional wireless networking equipment manufacturer and solution provider. With excellent technology, high quality and perfect service, our company provi...

1
    YRS
General Supplier

Wifi Camera Wifi Cctv Camera Wifi Router

Get Latest Price
Min. Order / Reference FOB Price
100 Unit US $26.00/ Unit
Local Area: Shenzhen, Guangdong, China
R&D Capacity: OEM, ODM, Other
Payment Terms: LC, T/T, D/P, Paypal, Western Union
Brand: OEM/Neutral
Model Number: CPE-880D
Product name: 5.8GHz Wireless Router Bridge Outdoor CPE
RF Power: 1000mW High Power

3km Long Range wifi Router Bridge 5G Outdoor CPE with wifi cctv camera
Description:
CPE-880D is an 5.8G 300Mbps outdoor CPE/Wi-Fi Bridge with LED display. Comply with IEEE802.11a/n standard, Atheros chipset, it supply you a stable and faster Wi-Fi networking. What’s more, with 15dBi high gain antenna, 27dBm high power output power, the Wi-Fi distance more than 5000 meters.
CPE-880D with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What’s more, there is a configure switch, which can setup CPE-880D’s IP address, RF Power, Channels, no need to access into GUI, avoid the complex setup program.
CPE-880D with wonderful RF performance, receive sensitivity can be -90dBm, then data rate can be 300Mbps, improved hardware Wi-Fi interference, it is best choice for video and security industrial.
Meantime, it support Power over Ethernet, support 24V passive PoE, easy in setup even no power socket nearby. With LED light show signal strength, easy to find a suitable place for outdoor CPE, save much human work and cost. With water proof case, it is best choice for outdoor Wi-Fi projects.
Main Features:
ABS weather-proof shell, temperature adaptive and board protective .
CPE-880D with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Then PCB board with ESD protection, adaptive to various environment, the working temperature can be normal at -40℃ to 55℃. Suit for any country.
300Mbps high speed, Atheros industrial chipset, wider application
CPE-880D comply with IEEE 802.11a/n standard, 300Mbps high speed, with Atheros industrial solution, it is a Wi-Fi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.
500mW High Power, 15dBi High Gain Antenna, Long Range Wi-Fi Device in market.
CPE-880D with external power amplifier,500mW true power, 15dBi high gain antenna, the Wi-Fi range is more than 5000 meter, it is the device with most stable performance in long range, max load users, longest Wi-Fi range.
5GHz full frequency, more channels, lower latency, higher stability
CPE-880D with full frequency of 5020~6100MHz, more than 70 channels available, it avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
Multiple operation mode: Wireless AP, Wireless Router, Wi-Fi Repeater, WISP, WDS
It support Wireless AP, Gateway, WISP, Wireless Bridge, WDS operation mode, effective solution for PTP, PTMP application and outdoor long range Wi-Fi coverage application.What’s more, there is WDS button on the case, easy to do PTP,PTMP connection by press the WDS button and reset button, no need to access into product GUI.
Support Power over Ethernet, cost save
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost, with 24V/48V PoE, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Easy configure and install, remote control
CPE-880D with LED display and configure switch, simple to check the working operation mode, channels, RF power and IP address, even can adjust this data by this configure switch, supply more efficient service for your networking.
With LED signal lights to show signal strength, easy to find a suitable place of outdoor CPE, then firmware comply with AC controller system and Cloud Management System, which helpful in central management and data setting, to implement Advertisement and authentication function, save much human work and cost, more professional in outdoor wireless networking solution.
Specification:
Standard
IEEE802.3, IEEE 802.11n, IEEE 802.11a
Frequency
5.020 - 6.1000 GHz
Channel
CH4 ~CH220
Modulation
OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CCK
Data Rate
11n: up to 300Mbps(dynamic)
11a: up to 54Mbps(dynamic)
Protocol
CSMA/CA,CSMA/CD,TCP/IP,ICMP,NAT,PPPoE, DHCP , Wired static , Wi-Fi Client , UDP, DDNS,
Operation Mode
AP, Gateway, Bridge, WISP
Security
64/128bit WEP
WPA(AES,TKIP with IEEE 802.1x)
WPA2(AES,TKIPwith IEEE 802.1x)
WPS
RF Output Power
802.11a: 54M 24±2 DB, 6M 26±2DB.
802.11n HT20: MCS7 23±2 DB, MCS0 25±2DB.
802.11n HT40: MCS7 23±2 DB, MCS0 25±2DB.
Receive Sensitivity
802.11a: -70dbm@54Mbps; -90dbm@6Mbps.
802.11n HT20: -70dbm@MCS7, -90dbm@MCS0.
802.11n HT40: -66dbm@MCS7, -90dbm@MCS0.
Antenna
15dBi MIMO Panel antenna
Size(mm)
L: 257mm, W: 87mm, H: 38 mm
Weight
327g
Working Temperature
-40°C ~ 55°C
Storage Temperature
-40°C ~ 70°C
Humidity
10% ~ 90% (Non-condensing)
Interface
1 * RJ-45 WAN Port
1 * RJ-45 LAN Port
1 * Reset Button
1 * DC Jack
1 * WDS Switch Button
Power
Output: DC12V(POE 24V), 1A; Input: 110V/220V
LED Light
Power, Wi-Fi, WAN, LAN,Signal StrengthDetailed ImagesCompany Information

Send your message to this supplier

*From:
To:
Shenzhen Yunlink Technology Co., Ltd.
*Message:

Enter between 10 to 1,000 characters.

*Email code:
This is not what you are looking for? Post a Sourcing Request Now