12v 5a Power Supply Power Supply 12v 5a 60w Switching Power Supply

SpecificationHow to choose switching power?
As the heart of electronic equipment, switching power supply plays an important role in the safe and reliable operation of electronic equipment
The switching power supply consumes part of its power and releases it in the form of heat ,there are some problems to consider when selecting switching power supply:
1, in order to improve the reliability of the system, it is recommended that switching power supply work in the 50%-80% load is better, that is, if the power used is 20W, should choose the output power of 25W-40W switching power supply.
2, as far as possible the use of manufacturers of standard power supply, including the standard size and output voltage. This will lead to faster delivery; on the contrary, special sizes and output voltages will increase development time and cost
3, clear the range of the input voltage, the input AC input voltage specifications for example, commonly used with 110V, 220V, so the corresponding had 110V, 220V AC switch, and universal input voltage (AC:85V-264V) three specifications. The input voltage specification shall be selected according to the use area.
4, switching power supply will consume part of the power in the work, and released in the form of heat, so users in the system design (especially closed systems) should consider the heat dissipation of switching power supply.
Classification of switching power supply1: Centralized power supply box6: Waterproof switch power supply2: High power switching power supply7: Single group switching power supply3: Rainproof switch power supply8: Multi group switching power supply4: Rail type switching power supply9: Ultra-thin single group switching power supply5: LED switching power supply10: Rail small volume switching power supplyPower Supply 12V 5ABrandZishen/OEMTypeSwitching Mode Power SupplyModel No.S-60-12Input VoltageAC110V~220VOutput VoltageDC12VOutput CurrentDC5APower60WProduct DescriptionMODELMS-60-5MS-60-12MS-60-24OUTPUTDC VOLTAGE 5V12V24VVOLTAGE TOLERANCE ±2%±2%±2%RATED CURRENT12A5A2.5ACURRENT RANGE0-12A0~5A0~2.5ARATED POWER60W60W60WRIPPLE & NOISE120mVp-p150mVp-p180mVp-pDC VOLTAGE ADJ. RANGE±10%±10%±10%SETUP, RISE, HOLD TIME800ms,30ms,20ms/230VAC,1200ms,30ms,20ms/115VAC
INPUTVOLTAGE RANGE100~240VAC 47~63Hz,135~373VDCAC CURRENT1.2A/115VAC 0.6A/230VACEFFICIENCY80%85%86%INRUSH CURRENTCold start 45A/230VACLEAKAGE CURRENT<1mA/240VAC
PROTECTION
OVER LOADRated output power110%~135%Start overload protectionProtection type:hiccup mode,auto-recovery after fault condition is removed
ENVIRONMENT
WORKING TEMP, HUMIDITY-10℃~+60℃;20%~90%RH(Please refer to“derating curve”)STORAGE TEMP, HUMIDITY-20℃~+85℃;10%~95%RH Non-condensingWITHSTAND VIBRATION10~500Hz,2G 10min./1Cycle,Period for 60min,Each axes
SAFETYWITHSTAND VOLTAGEI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVACISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
FIT STANDARDSAFETY STANDARDFit UL1012EMC STANDARDFit EN55022,CLASSAOTHERSDIMENSION111*78*30(L*W*H)WEIGHT0.22kgMTBF355K hrs min. MIL-HDBK-217F(25℃)
NOTE1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.Product AdvantagePower supplies - quality assuranceAdopt the original power module, all copper coil, high power. Containing inrush current suppression circuit, with short circuit and overload protection, safe to use, long life!
304 stainless steel radiator shell
The appearance is small, exquisite and fashionable. The whole body is made of 304# stainless steel, and the upper cover is made of hollow galvanized protection cover. The heat dissipation is fast and the movement is protected. 100% full load burn-in test!
Dual filter capacitor - all copper coil
Internal components visible! It adopts the original circuit board design, 105 degree of double filter capacitor, ripple small, strong filter magnetic ring, capacitor power is bigger and more powerful. Quality all copper coil design, control through resistance, increase product durability, stability and carrying capacity!
LED indicator - screw connection port
In normal operation, the LED indicator lights up automatically, indicating the normal operation of the switch power supply. Simple and clear. The connection port adopts a screw type interface, and the wiring is convenient, and the dust cover is provided!
Upset steel plate base - durable against impact
The bottom of switch power supply is made of thick stainless steel plate. It is resistant to falling and shock, not easy to deform, and better protect the internal components of the machine. Indoor universal security power supply, stability is strong!
ApplicationsLED City Lighting System

Communications Equipment

Security Monitoring SystemPacking & DeliveryCompany InformationFAQQ1. Can I have a sample order for power supply?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 5000 units ;
Q3. Do you have any MOQ for power supplyorder?
A: Low MOQ, 1pc for sample checking is available
Q6. Is it OK to print my logo on power supply?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?

A: Yes, we offer 2-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new power supplywith new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.