switchable glass film privacy protection film PDLC smart glass film for rooms offices partition and

1. Product Description
Smart switchable film is a product that is capable of adjusting light transmission between transparent and opaque using AC power. Due to moisture sensitivity, earlier versions of the film were used only to make smart glass by lamination on glass. With continual improvement in moisture resistance, the new (3rd) generation of the film can be directly installed on existing windows with special glue or self-adhesive. It combines many functions, such as light adjustment, UV and infrared blocking, advertising and security.
2.Product Function
1) Privacy Protection : The biggest function of Our pdlc film is privacy protection,which can control the glass between transparent and opaque.It can protect your privacy by our smart film
2) Projection Screem: Our Pdlc film can be used as a good projection screen, in appropriate light environment, if choose high lumen projector, the image of projection effect is very clear(suggest use rear projection mode).
1*30m/roll-samrt tints privacy protection film PDLC smart film for rooms offices partition and privacy protection3) Safety Protection: Our pdlc film thickness is about 0.36mm. When installed on your glass window,It can adhensive your window closely, When the window are broken, The film can avoid the window glass flying around and hurt others,

4) Environmental Protection: Our PDLC film attached on the surface of glass,Which can resist heat over 98% UV and over 95% infrared ray. In order to reduce thermal radiation, it requires shielding partial infrared ray. While if shielding UV can protect indoor furnishings not fade, aging and so on, and protect people against the disease by ultraviolet radiation.
3. Product Parameter
Optical Properties
Parallel Light Transmission
ONOFFVisible Light Transmission
ONOFFVisual Angle
ONUV Blocking
On/ offElectrical Properties
Operating Voltage
OnFrequency
OnCurrent
OnPower Consumption
OnSwitching Time
ON to OFFOFF to ONSpecification
Thickness
0.38mm
Max Size
1500mmx3000mm

Glass Color:Other index
Working Temperature
–10~60 °C
Preserve Temperature
–20~75 °C
Life time
less than 50000 hr
4.Product Structure
Protective Film+Adhensive Layer+ITO film+LC+Polymer+ITO film+Protective Film
5.Working Principle

· Without power the liquid crystal molecules (microdroplets) are disordered. This prevents light from penetrating the film, rendering it opaque.
· When power is applied to the smart film the liquid crystal molecules are forced into alignment, rendering it transparent 6. Product Wiring
Parts List
1. Socket2.Plug3.Power Transformer4. Smart FilmI. Socket II.Dimmable Switch
7.Product Installation
1) Tools Prepared 2) Glass Cleaned 3) Film Pasted 4) Film Scraped 5) Power OFF 6)Power On
8.Product Application
1)Invisible Curtain
Smart film can be used as invisible curtain, it will be in transparent status when power is on; it will be in opaque status while the power is off. Therefore it can replace the traditional blinds and cloth curtain which eventually creates a more comfortable and energy-saving environment .
2)Projection Screen
Smart film can be used as a switchable projection screen on a store window for advertising. Smart film is good for rear projection function, when you projected from indoor, people outside of the shop will see showroom etc.
3) Touch screen technology.
It is a perfect combination between touch screen and smart pdlc film, which offers new possibility for smart film application. It can be used in the office/meeting room/school etc , You can project your PC on the pdlc film and operate it by hands,
Application Display :
9. Product Package
Small Quantity
A drum cylinder is used to carry the film inside to avoid any damage during transporation.
Mass Quantity
The product is rolled into a strong drum and then palced into a strong carton package.
10.Product Workshop
11.F.A.Q
1).Question: Does your company provide installation services overseas?
Answer: NO , We are a material distributor and provide complete DIY kits as well as technical support. As long as the contractor is careful and DOES NOT KINK OR DENT THE MATERIAL OR PULL THE WIRES OUT there should be no issues. Obviously a clean work environment is helpful.

2).Question: Does this need to be installed by an electrician?
Answer: NO, We can provide you a complete closed system that is ready to install with a plug, it can be DIY by yourself. If you would like to hire an electrician to achieve your goal that is your own decision.

3).Question: Can you cut the film on site....or do you need an absolute measurement from me before the panels are custom made?
Answer: The material is custom manufactured with special laser equipment to ensure straight cuts however you can cut the material if needed to add a logo, trim etc.

4).Question: Can we install this film on the top half of the glass only? We were thinking we wanted to keep the existing decals in place and install film from the decal up to the top of the panel.
Answer:YES - You can install on top half or bottom half only, just be careful for the wiring. 5).Question: Is the PDLC film energy saving?
Answer:- Yes, It is considered a green product that consumes around 5 watts per sqm.6).Question: Does it block the UV harmful rays?
ANSWER:YES. It blocks over 98% of the harmful UV rays in both its energized and non-energized state.7).Question:Can we install this product ourselves?
Answer:YES, we offer complete do it your self kits with practice pieces.

8).Question:How long will it take for production and delivery..
Answer: This depends on Material size, total qty order and geographic delivery place.For expedited sample orders, we can ship as fast as 3-7 working days from payment /confirm/iation. If for mass production, it will only last for 7-10 working days approximately.