Product Description
Part numberNY-D02
Wechat/Tel
+8613534149774
Email/Skype
qindamodule@ 163.com
QQ
1823232721
3.2Show state description
Common control of the controller3Operation state, welding preparation, parameter query, parameter change
Welding preparation:Running lightAlwaysTime, current, interval, time, current indicating light out
Parameter queryThe operation indicates the lights, time, current, interval, time, and current relative to the light, the digital tube is always bright, and the value of the display is the corresponding parameter value.
Parameter changeOperation indicator lights out, time, current, interval, time, current corresponding indicator light, digital tube flicker, and display value is corresponding parameter value change value.
3.3: welding preparation
By [selection]/Adjust the encoder counter clockwise rotation,Make the running light bright, time,The current, interval, time, and current indicate the extinction of the lamp, and the welding can be carried out at this time. The value of the digital tube is the current welds value.
3.4: voltage calibration
Because this controller has the function of net pressure compensation, it is necessary to calibrate the voltage when the first time is installed, only one can be calibrated. (as long as the power transformer is not replaced, no recalibration is needed.)
Calibration operation:
In running state, the lights that are kept on a micro motion until the time, the current and the interval are all lit up. At this time, the market voltage is measured by multimeter, for example, the voltage measured at that time is225VSo, the rotary encoder makes the value of the digital tube display225You can then double click the fretting switch and exit the calibration.
3.4: parameter changes
Click here for more details:
Company Information
Advantages
Packaging & Shipping
FAQ