YB-05 and YBD-05 50000-90000kcal heating dryer boiler using waste waste engine animal oil burner

Product Description
Waste Oil Burner
1. PurposeTurn on the power supply, the fuel supply of the burner is heated, and then ignited. The air solenoid valve opens automatically. The oil mist sprayed by the nozzle is broken by the electric spark and ignited to form a flame. It is mainly used for boilers as a heater of the boiler.2. Classification:Gas burner, diesel burner, waste oil burnerOur's burner burns waste oil, including waste engine oil, waste hydraulic oil, waste vegetable oil, waste gear oil, etc.3. Application:Boilers, heaters, dryers, etc.4. ComponentsChassis, small fuel tank, large fuel tank, computer control, flame control system, fan, oil pump motor, etc.5. Heat output50,000 kcal, 100,000 kcal, 200,000 kcal, 300,000 kcal, 500,000 kcal, 5, 100,000 kcal are very popular in Europe.6. Fan diameterGenerally is114MM, 100MM 90MM optional, the length of the fan is 170mm, the flange to the head of the fan is 135mm7. Total powerSmall fuel tank heating pipe 1KWLarge oil tank heating 500WFan motor 180WOil pump motor 90W8. Flame lengthCan reach 2.5 meters, B-05 and B-10 in 1-1.5 meters

High temperature protection.
Will send signature when the oil temperature reach 160 ℃.

Flame out protection.
Will send signature when the flame off.

High oil level protection.
Will send signature when the second float switch floated.

Oil using out protection.
Will send signature when the time of pumping more than 120 seconds.

Specification
Model Number
YB-05 ( One air stage )
YBD-05 ( Double air stage )
Oil consumption
5 L/H
5-9 L/H
Output power (kw)
59 kw
59-107 kw
Output heat (kcal)
51,000 kcal
51,000-92,000 kcal
Outpur heat (btus)
201,000 btu
201,000-365,000btu
Nozzles
1*WN-01
Blast Tube Diameter (mm)
114mm
Fuels
used engine oil, used vegetable oil, used crankcase oils, used Glycerin, used Hydraulic oil, used synthetic oils, waste machine shop cutting oil, waste mineral spirits solvent, waste grades #1, #3, #4 heating oils, waste mixed heavy oil etc
Voltage
Using
waste boiler, steam boiler and other heating equipment.
Two Models Optional
Double air stages burner is with more power and longer flame. You can choose the one you want.
Detailed Images

1. Big oil tank, 100L, steel plate, to contains fuel as much as possible when using.2. There is a heating instrument at the bottom of the oil tank with temperature controller to pre-heat fuel before pumping, esp. considerate for using in cold area.



3. It will be better if you have your own oil tank. Cause it is heavy and cost too much usually we don't recommend you to ship it by air. 
Packing & Delivery
Foam in, Carton box outWithout Preheating Big Oil Thank:
28kg,  57*56*44cm


With Preheating Big Oil Thank:
49kg, 59*58*50cm


Foam in,  Plywood box out
Without Preheating Big Oil Thank:
35kg, 60*58*51cm

With Preheating Big Oil Thank:
60kg, 60*60*60cm

FAQ
The buyers ofen ask about the waste oil burner:

1. Are you a manufacturer or trade company?
We are manufacturer and we have our own trade company.2. Do you have any certification?
Yes. All of our products have been CE approved.3. The minimum order?
1 set.
If have stocks, we will send out the products within 3 days after received the payment.4. The different voltage can use it?
Yes.
Generally, our stocks' voltage is 210-240v. Please inform us if you need 110v or other.5. What should I do when I received the products?
Check carefully. If any damage, please take a video or some photos at first and timely feedback to us.

6. Your products' warranty?
1 year and we could supply technical service for ever.

Notice:1. The ignition transformer belongs to high-voltage ignition, and the output voltage is 12 kV, which can cause danger. It is strictly forbidden to touch it during work.2. When connecting the power supply, the voltage level of the burner must be determined first to avoid damage to the equipment and other dangers caused by the use of different levels of voltage.3. The equipment has been adjusted before leaving the factory. Customers can fine-tune the air pressure valve and damper according to the actual combustion situation. Try to avoid adjusting the ignition rod, flame stabilizing disc spacing, etc.4. There is high voltage in the electrical control box, and it should be avoided to open the box; during the maintenance, professionals need to power off for maintenance.5. To control the start and stop of the burner, it is necessary to use the reserved control terminals in the control box (one end is connected to the blue and white wires) to listen to the external normally closed terminal to avoid the control of the burner by turning on and off the power supply. Start and stop. It is forbidden to introduce power into the start-stop control terminal.6. When the burner is working, it is strictly forbidden for people and objects to stay and place in front of the fan.

Contact
Related Products