Dentist led bulbs shadeless oral lamp sensor led light for dental chair unit

Dentist led bulbs shadeless oral lamp sensor led light for dental chair unit
Scope Of Application:
This Product is mainly applied to the dental clinic for illuminating the mouth cavity of patient.
Layout and Configuration:
Installation method:
1. Plug and connect the terminal connectors as shown in Figure 1, to ensure reliable connection of the connector;
2. As shown in Figure 2, insert the shaft of the lamp arm and the base of the lamp into the inner hole of the lamp arm and align it with the screw hole. Tighten the hexagon socket screw with a tool.
3. Insert the trim cover into the lamp arm as shown in Figure 3.
Technical Parameters:Input VoltageAC/DC12-24VPower13VA0.7m illuminance valueApprox. 7000 Lux to 25000 LuxColor temperatureApprox. 3000K to 5000K (3 levels)Color rendering indexRa>90Net weight1.3kgGross weight1.8kg
Working Environment:Working environment Storage and transportation environmentAmbient temperature5°C~40°CTransport temperature-40°C~50°CRelative humidity30%~80%Relative humidity≤85%Atmospheric pressure30~75KpaAtmospheric pressure50~106Kpa
Instructions:
1. Opening and closing operation: After power-on, click the ON/OFF key to turn on the light or slide the sensing area with your palm to turn on the light.
2. Adjusting the brightness: control panel dimming There are 7 levels of brightness adjustment in total (digital display is 07 / 10 / 13 / 16/ 19/ 22 / 25 , which represents the illumination level from low to high).
Click the Brightness adjustment key,start the dimming function. When the brightness is adjusted to the maximum or minimum brightness, the reverse dimming will be started if you continue to click the .
Induction dimming Palm stays in the sensing area for 1-2 seconds,starts the dimming mode, when the brightness is adjusted to the maximum or minimum brightness, the reverse dimming will be started if you continue to keep the palm in the sensing area. When the proper brightness is reached,just put your palm down.
3. Adjusting the color temperature: Click the Color temperature adjustment key to change the color temperature. the indicator light blue,green and red represent cold white, positive white and warm white.
4. Turn on/off the anti-cure mode: Click the Anti-cure key to turn on the anti-cure lighting mode. In this case, the blue component of the light is filtered out and the composite material can be used for a long time. Slide right to normal operation mode.
5.The product has a brightness memory function, which will enable the brightness of the last off when it is turned on to work.
6.Both sides of the outer handle, press the top of the Bowen button to pull out, the handle can be removed, easy to clean and disinfect.
Hot Selling