Products Description
Details Images
How to Use:
1. Soak about 5-8 minutes with 75% alcohol,Or use ultraviolet to disinfect for about 45 minutes. Do not use autoclaves,steam and high temperature sterilization methods. 2. Apply suitable nutritional lotion/cream on area of skin. 3. Apply nutrition or mask products on the skin that requires care in case of skin inflammation.Needle for dr.pen M7:
-1/3/5/7 pins used for PMS(Permanent Make-up System) tattoo,eyelash, eyebrow, face or lips - 9/12/24/36/42 pins used for MTS(Mirconeedle Therapy Sstem) -Nano needle (square&roudess, 3D/5D needle chip)using the advanced biological nanometer.
Product packaging
Packing List:
1 x Hand piece
1 x Adapter
1 x Manual
1 x Power Cable
2 x Needle Cartridge
Installation Instructions
How it Works?
1. Setting
Adapter Mode
(1) Plug in DC adapter to the jack.(2) Plug in DC adapter to AC outlet.
2. Preparation
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2 of machine, push needles cartridge horizontally up to the end .
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needles length should be done after turn on the machine.
(5)If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots(slot
1,slot2)together.
3. Adjustment of speed and needle length
(1) Adjustment of Speed and ON/OFF
(2) 5speed level control Pressing the switch 2 econds to open the device, It starts from the lowest speed to highest speed when
you turn on the power firstly.
The speed cycles low to high. Please press the switch 2 seconds when you need to stop the device.The flicker’ s frequency of light
faster, the speed is higher .
(3) Adjustment of needles length You can adjust the length of needle by turning the adjustment ring clockwise or counter
clockwise. Turning it clockwise, length of it will be longer .
Packaging & Shipping
FAQ
1. What is the Payment Terms?
Re: T/T (Wire Transfer), Western Union, Moneygram2. How do you delivery the machine?
Re: By door to door service, say DHL,UPS,TNT,FEDEX,etc ,Or air cargo, Or by sea. 3. What about the delivery?
Re: about 3-7 working days.4. What's your warranty?
Re: 12 months for host machine. 5. Do you accept OEM/ODM service?
Re: Yes. We can design and produce beauty machines according to customer's requirements.
Company Profile