Medical IT isolated power system key safe power used in hospital operate room

Components
A set of complete medical IT power system is consisted of 5 parts:
1. Insulation monitor
2. Medical isolation transformer
3. Remote alarm terminal
4. Current transformer
5. Specialized power supply
Features
• Special insulation monitor for medical IT systems
• Insulation, load and transformer temperature monitoring
• Output alarm relay
• Built-in or external self-check button
• LED display with backlight
• High insulation class
• Remote monitoring operation
• Remote operation terminal alarm and interlock function
• RS485 interface
• Protection level IP20
• Low noise level < 40dB
• Guide rail installation
Diagrams
SZHINO Series Isolation Power System Electrical Diagram
SZHINO Series Isolation Power System Connection Diagram
Technical Parameter
SpecificationsSZHINO-1 Insulation Monitor
- Insulation monitor especially used for medical IT system
- Insulation monitoring, load monitoring and isolation transformer temperature monitoring functions
- Liquid crystal display with LED
- Adjustable range of insulation monitoring response value: 50-500kΩ
- Adjustable range of overload monitoring response value: 5A-50A
- Output alarm relay
- RS485 interface
- Built-in or external self-check button
- Wiring monitoring
- Guide rail installationSZHINO-2 Series Isolation Transformer
- Capacity: 3.15-10kVA
- Temperature sensor installed inside the windings
- Noise < 35DB
- Completely according with GB16895.24-2005 and GB19212.16SZHINO-5 External Alarm Indication and Testing Instrument
- External alarm and display device of insulation monitor
- LED displaying insulation value and load condition
- Buzzer sound alarm and mute button
- RS485 interface
- Chinese/English language setting
- Waterproof panel to be easily cleanedEDS461-L-2 Insulation Fault Assessment Instrument
- Every Instrument provided with 12 measuring channels and connected to 12 measuring current transformer
- LED display
- Scanning time of every channels: 10s
- Test current response sensitivity: 0.2-1mASZHINO-3 High Sensitivity Current Transformer
- Installed on each circuit of medical IT system
- Internal diameter of current transformer: 10mm
1. Q: What should I pay attention to when I order the isolation system?
A: You should tell us what devices you need, the separate parts or an assembled isolation power system cabinet consisted of the five parts. You should make sure the type of the transformer as there are single-phase transformers and three-phase ones. Usually, it is single-phase.
2. Q: How much is the cabinet and assembly service?
A: We have assembled the five parts in a cabinet, and you can use it only by connecting the incoming line switch to the outgoing line switch. It is very convenient. The cost of cabinet and the assembly service cost is cheap.
3. Q: Where should I install the remote alarm terminal?
A: You can install it in the case or the nursing station.
Notice:
Our cabinet case can be customized. Please pay attention to the 3rd question above and tell us the cabinet length, width and height if you order the case, so we can make the correct case for you.
4. Q: Can I have OEM service or to be the distributor?
A: Yes. If you want to get more information you can contact us.
5. Q: How long is the order time?
A: about 2 weeks.