The current transformer is suitable for current, electric energy measurement and metering of electric system (the rated frequency: 50HZ or 60HZ and the rated voltage: below 0.66KV). It is a highly sensitive current sensor and converts even very small test currents into evaluable signals. It is in accordance with IEC60044-1, 2003 and GB1208-2006, GB1208-2006, 2BY096-82 and 2BY097-82 current transformer standards.
It is provided with ABS flame retardant plastic shell and is fully enclosed, which prevents the products from humidity. Because of the application of superconducting magnetic material (ring iron core through annealing treatment), the product accuracy can get to grade 0.2S or 0.5S in the condition of same volume, and the product can correctly meter and measure current under 1%-120% load of primary current.
Technical ParametersRated input currentmultiples of 50ARated output current (secondary current)2.5mALinear range0~20AImpulse current100A*1sLinearity<0.1%Phase displacement<5' (after compensation)Isolation withstanding voltage >3500UacLoad resistance≤800ΩOutput voltage≤2VApplication temperature-50℃~70℃Relative humidity<90%Frequency range20~4000HzMaximum resistant temperature120℃Altitude≤3000mWithstanding voltage with working frequency3000V, 1min, 50Hz (between the shell and the secondary side)Insulation gradegrade E
You can buy a complete set of medical isolated power system from our company, which includes the following five components:
1. Insulation monitor
2. Medical isolation transformer
3. Special power supply
4. Current transformer
5. Remote alarm terminal
Q1: What should I pay attention to when I order the isolation system?
A1: You should tell us what devices you need, the separate parts or an assembled isolation power system cabinet consisted of the five parts. You should make sure the type of the transformer as there are single-phase transformers and three-phase ones. Usually, it is single-phase.
Q2: How much is the cabinet and assembly service?
A2: We have assembled the five parts in a cabinet, and you can use it only by connecting the incoming line switch to the outgoing line switch. It is very convenient. The cost of cabinet and the assembly service cost is cheap.
Q3: Where should I install the remote alarm terminal?
A3: You can install it in the case or the nursing station.
Notice:
Our cabinet case can be customized. Please pay attention to the 3rd question above and tell us the cabinet length, width and height if you order the case, so we can make the correct case for you.
Q4: Can I have OEM service or to be the distributor?
A4: Yes. If you want to get more information you can contact us.
Q5: How long is the order time?
A5: about 2 weeks.