400T Cross Flow Square Water Cooling Tower Features:
1. frame adopt the national standard Tang Gang, high hardness, thick material, load-bearing capacity, surface hot galvanized treatmen.
2. Body casing material, surface layer of plastic used imported wax layer + 33 # gel coat layer, hard and durable, glass steel layer with 889 # resin + boulder fiber, toughness, high hardness, acid
3. All the tower with stainless steel screws, durable and not rust.This is customized part.
4. Exhaust system using high-quality copper core motor and aluminum alloy blade, wear-resistant, high temperature
5. oblique pattern design PVC film to reduce the flow rate, increase the heat transfer area, greatly improve the cooling effect
6. Other: stainless steel float copper valve, nylon cable knot, high temperature corrosion resistance
Cooling Tower Type
Cross square type tower
Model
AYD-400TCirculating Water Flow
400 m3/h
Inlet Temp/Outlet Temp
37℃/32℃DB Temp
31.5℃
WB Temp
27℃
Cooling Capacity
2,000,000 kcal/h
Noise Value
62.5dB(A)
Power Supply
380V/3P/50Hz
Water Requirement
PH=6-8Air Water Scale
0.68 kg/kg
Tower Head
40kPa
Flying Water Loss
≤0.001%
Evaporation Loss
0.83%
Net/Running Weight
2830 kg/6680 kgFan Type
Axial-Flow
Air Volume
240,000m3/h
Total Static Pressure
90Pa
RPM
240r/min
Fan Dia(Φ)
3,200 mm
Quantity of Fan
4pcs/set
One set
Motor Type
All Closed Water-proofDriving Mode
Belt
Motor Power
11 kW
Start Way
YL*W*H
3750*5950*5030 mm
Inlet Pipe Size(DN)
150mmOutlet Pipe Size(DN)
300mmOverflow/Drain Pipe(DN)
80mm/80mmauto/manual supply(DN)
50mm/50mmOrifice
Glass Fiber Reinforced PlasticsSprinkler System
Boarding
Basin, Vat
Belt
Composite MaterialFan
Aluminum AlloyMotor
All Closed Water ProofFilm
P.V.C.Iron frame, Motor frame
hot-dipped galvanized steel