Outdoor Table Accessories Plastic Screw Cap

In addition to an optimum design and raw material selection, proper tooling designed and developed by our experienced tooling personnel allows us to manufacture consistent, high-quality plastic profile and tubing extrusions time after time.
Tolerance
1. Thickness: 0.1mm
2. Width: 0.1mm
3. Diameter: 0.1mm

Testing Information
1. ROHS
2. High Temperature Resistance
3. Low Temperature Resistance
4. UV Exposure
5. Humidity
6. Color Variation
7. Salt
Customizations
1. Width
2. Thickness
3. Diameter
4. Finish Color
5. Shape
6. Packing

Supply Capacity Information
*Production Lead Time:
1. High Season (September to April): 15-20 days/50 metric tons
2. Low Season (May to August): around 5-15 days/50 metric tons
*Sampling:
1. Lead Time: 3-5 days.
2. Free samples are available.


FAQ (Frequently Asked Questions):
Knowing some customers may be unfamiliar with our plastic profile extrusion capabilities, we have compiled a list of questions we are frequently asked. What is durometer?Durometer is a measurement of the material's hardness and is measured with a device which is pressed against the profile's surface, resulting in a dial guage reading. The most common reading is based on a 15-second delay. Common scales are Shore A for flexible materials and Shore D for rigid compounds.What is a dual durometer or co-extrusion?
Dual durometer, or co-extrusion, is the fusion of two or more materials of varying physical properties into a single extruded piece. An example would be a rigid part with flexible fingers that could be used as a gasket or cushion. Typically, the two materials are from the same family of polymers to ensure compatibility for adequate adhesion; however, in some instances dissimilar materials can be extruded together, providing adhesion can be obtained.What quality control procedures are followed?
Each product shipment is documented for compliance to strict quality control guidelines, in addition to the nuances of the specific production run. Quality control is the primary responsibility of the production operator and is monitored and recorded by Quality Assurance personnel on an hourly basis. BHM is routinely audited by major corporations for compliance to recognized quality systems. The consistently high level of product quality is considered to be the primary reason for our significant growth over the last decade.What is the typical minimum run quantity?
This is a prime example of "it all depends." Due to varying set-up costs and run efficiencies, we attempt to restrict the minimum production quantity to 1,000 pcs. However, this quantity may vary depending on the projected costs, which are significantly higher for shorter run lengths. We are pleased to provide quotations for various quantity and release quantities upon request.What is a vacuum sizer (calibrator)?
Vacuum sizers, sometimes called vacuum calibrators, are an integral part of many plastic extrusion set-ups and specific to each custom profile. The sizer determines the final part dimensionally by using vacuum to shape the profile during the cooling process. While the initial cost may seem high, the sizer ensures manufacturing cost controls and the same size every time.Company Overview:
Production Flow:

Our products are selling to all over the world!