Product Inrtoduction
Product Introduction
Orthopedic casting tape is composed by manifold layers of special made fiberglass, which was soaked by polyurethane. Polyurethane material is one kind of block co-polymer which contains soft segment and it is characterize by better viscosity, fast drying time, high rigidness and light weight. Due to better bio-compatibility, polyurethane is widely used in medical fields. Animal study and acute and chronic toxicity test have proved that medical polyurethane is non-toxic and no induced distortion, no local irritation and no allergic reaction.
Features
1. High Strength,Light Weight: More than 20 times harder, 5 times lighter and use less than the traditional plaster bandage. And easier to be cut.
2. Molding Fast: It begin to mold in 3-5 minutes after open the package and could bear weight after 20 minutes,But plaster bandage need 24 hours for full concretion.
3. Good Air Permeability: Unique knitted net sturcture make the bandage many holes in the surface to keep good air ventilation and prevent sking damp, hot or pruritus.
4. Excellent X-ray radiolucency: It convenient to take X-ray photos and to check the bone healing without removing the bandage.
5. Good Waterproof: Don’t worry to be soaked in water for the second time and it is acceptable to take a bath and do hydrotherapy when wore with the orthopedic casting tape/orthopedic splint.
6. Environmentally Friendly: Material are environmental friendly, it will not produce polluted gas after being burn down.
7. Simple Operation: Room temperature operation, short time, good molding feature.
8. Wide range of application:External fixing of orthopedics,correction utilities of orthopedic surgery accessibility tools for artificial limb,support tools,local protective support of burn surgery etc.
How to Use
1. Wear the gloves and choose the proper specifications.
2. Use the cast padding or stockinet on the fixed part.
3. Open a bag and take out the cast, DIP in room temperature water at 4-6 seconds and press 2-3 times, take it out and squeeze out the excess water.
4. Wrap the cast spirally according to the need, keep the proper tension. Wrap 2-4 layers at non-weight-bearing position and 4-6 layers at weight-bearing position.
5. Shape the wrapped cast according to the need. The solidify time is 3-5 minutes, 20 minutes later the cast reaches the enough strength.
6. Use the electric cast saw to cut and remove it.Main Parameter
Packaging & Shipping
Payment
Company Information
FAQ
Our Services