Manufacture PVC TPO Polymer Roofing Membranes Hot Air Automatic Plastic Welder

Product Description
2020 high frequency PP ,PVC Hot Air Membrance Hot Wedge Welder / Plastic Melting Machine with 3400W Power
The automatic welding machine is designed to weld plastic materials. The automatic welding machinecan weld advertising inkjet fabric, inkjet cloth, light box cloth, thick PVC cloth, mesh cloth, tarpaulinand other PVC, PE, DHPE, LDPE, EVA, Pp plastic materials that can be hot melted.
application
Packaging & Shipping
Company Information
Zhengzhou liudu mechanical electrical equipment Co., Ltd founded in 2005 and located in Zhengzhou is a leading professional manufacturer for advertising equipment and special manufacture of hot air welding machine over five years. We will continue to offer customers high-quality and perfect services with down-to-earth style of work and persistent efforts.
global exhibition
operation steps
1.First, make the picture smooth and tight, take joiner to accurate (about 2-4cm), fixed edges with tape or glue on the ground.
2.Set temperature and walk speed: set temperature and walk speed(according to thickness of banner), in general temperature we set is 350-500 degree Walking speed is around 3-4.
3.Start welding:when the actual temperature display around the expected value of the set temperature fluctuate (between about ± 5°), then start weld,at begin of weld,use one hand to take one banner up,then hold heat gun press heat gun positioning handle,turn heat gun to left and let the nozzle into overlap of the banner,then begin to weld.photo as below:
4.During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by hand.check photo:
5.Finish welding:turn the walking handrail to the right ,machine stop walk,but before cut off the power,we should put the set temperature button to zero.when the actual temperature below 50 degree.we can cut off the main power.or it would damage heat system.
Tips:For first user,we can use waste banner to test and find proper temperature,
we can do like this:take a small banner close the nozzle,if the banner hot melt quickly,it means,the temperature is OK,it not strong or burnt,we can increase or reduce temperature.we can also write down the temperature for this thickness of banner as sample.in next welding,based on this temperature.we just need to increase or reduce the temperature depends on thickness of banners.check the welding result.
contact us
Contact Information: