BT-S900B1 10.4 LCD Display Non-invasive low prices drager ventilator distributors

BT-S900B1 10.4' LCD Display Non-invasive low prices drager ventilator distributors
Product Description
Physical specifications Displaydrager ventilator is 10.4' LCD DisplayMode:drager ventilator is pneumatically powered and electrically controlled systemTrolley:
drager ventilator is Fitted with 4 nos anti-static rubber castors; two of which are
lockable for braking and easy maneuverability with foot operated brake provisionsTechnical Specifications:Gas requirement: drager ventilator is Medical oxygen and nitrous oxide with a pressure ranging from 280~600kpasafety valve <12.5 kPaRespiratory Rate1 ~ 99 bpmgas concentration output21% ~ 100% adjustableMaximum Minute ventilation≥18L / minmodes of ventilationA/C, SIPPV,IPPV,SIMV,PSIMV,CPAP,PCV,PEEP,SIGN,SPONT, MANUALVentilator compliance≤30 Ml/kPaPEEP:0 ~ 1.0 kPaPtr: -1.0kPa~1.0kPa IMV frequency:1~20 bpmI/E Ratio:4:1~1:4, Has the inverse ratio ventilationTidal Volume range0~2000mlInspiratory Plateau:0~1sMaximum Safety Pressure≤ 6.0kPaSigh:
one deep breath per 80 controlled respirations, the inspiration time is 1.5 times
of the setting pointPressure limit range:1.0~ 6.0kPa
Airway pressure alarm: Audible and visual and
with yellow and red color indicatingLower: 0.1 kPa ~ 6.0 kPa;Upper: 0 ~ 5.0 kPa±0.2 kPaVentilation Volume alarm: ≥ 18L/ MIN Power Supply AlarmAc/dc power supply are after failing to send out alarm immediately
Alarm Time: keep >120s
The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm,
the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen
of the anesthetic respirator.Operating conditionsAmbient temperature: 10 ~ 40oCRelative humidity:no higher than 80 %Atmospheric pressure:860 hPa ~ 1060 hPaPower requirement: 100-120 Vac, 50/60 Hz; Attention: the AC power supply used for the anesthesia machine must be wellgrounded.
Attention: the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993,
an oxygen monitor complying with ISO 7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical
Electrical Equipment Part II: Special Requirements for Safety and Basic Performance of Anesthesia System. StorageAmbient temperature: -15oC ~ +50oCRelative humidity: no higher than 95 %Atmospheric pressure: 86 kPa ~ 106 kPa. It should be stored in a room without corrosive gas and well ventilated
Similar Products
LED Display Ventilator, Model: BT-S500
10.4"LCD display screen Ventilator, Model: BT-S700B1
10.4"LCD display screen Ventilator with air compressor, model: BT-S700B2
10.4"LCD display screen Ventilator with air compressor, model: BT-S900B2
Workshops for OT
Certifications
Contact Us