Product Description
IntroductionJellyS series USB 3.0 ultra mini industrial digital cameras adopt the latest USB3.0 technology, the speed is much faster than USB2.0 digital cameras, it has high sensitivity, high dynamic range, hardware frame buffer and high-speed features. Jelly3 series digital cameras can be widely used in machine vision and a variety of image acquisition areas.
Features
1.1.2MP Mono/color industrial camera, 30fps 2.Mirco USB3.0 High-speed interface, plug and play, no need external power supply;3.With 32M built-in hardware frame buffer, make sure no frame lost, support more cameras work together;4.Support GPIO opto-isolated external trigger, External trigger delay setting does not affect the acquisition frame rate;5.Provide completed API for users' secondary development, support VC, VB and other development language;6.Support Windows XP, Win7, Win8, Win10, 32&64 bit operation systems, driver for Linux-Ubuntu & Android Operation System can be customized; 7.Precision aluminum alloy shell, small size 14x14x30mm, weight 10g only.
Application
JellyS series USB3.0 industrial cameras are mainly designed for machine vision and various high speed image acquisition areas. They can be used for Gel imaging, License image capture, Medical diagnosis, Microscopy imaging, Notes image capture, Industrial production line image capture, Fingerprint & palmprint image capture, Desktop image, High speed vehicle license plate capture, Outdoor Monitoring, iris capture and etc.SpecificationsModel MU3C120M/CColor/MonoMono/colorSensor TypeCMOSSensor ModelAptina AR0135ShutterGlobalSensor Size1/3 inchPixel Size3.75x3.75μmMax Resolution1280x960frame Rate30fpsScan ModeProgressive ScanImage OutputMicro USB3.0Power SupplyUSB3.0 Power Supply, 300~500mA@5Vframe Buffer32M BitInput/OutputOpto-isolated GPIO, 1 channel external trigger input, 1 channel flash output, 1 channel 5V power supply input / outputMain FunctionImage display, image capture (bmp,jpg,tiff), video capture(compressor is optional)Programmable ControlPreview and capture AOI, SKIP/Binning mode, Contrast, Brightness, Saturation, Gamma, Gain, Exposure, Bad pixel remove, Focus evaluation, User-defined serial Number(0-255), Hardware LUT(lookup table), Hardware CCM (Color Correction) White BalanceAuto / Manual ExposureAuto / Manual Image FormatSupport 8bit, 24bit, 32bit Image Preview and Capture, Save as "Jpeg", "Bmp", "Tiff" format Driver SupportActiveX, Twain, DirectShow, VFW Operation SystemSupport Windows XP/7/8/10 32&64 bit Operation System (Linux and Android Operation System custom development)SDKSupport VC, VB, C#, DELPHI developing language, support LABVIEW, OPENCV, HALCON, MIL Software Lens PortM12 Working Temperature0°C~60°CStorage Temperature-30°C~70°CCamera Dimension14mm(height)x14mm( width)x30mm(length) Camera Weight10g(High-precision CNC aluminum alloy shell)AccessoriesColor cameras come with IR cut filter(mono camera does not have filter), 3m USB cable with fix screws, 6-pin Hirose GPIO connector, 1 CD with software and SDK.Storage Temperature-30°C~70°CCamera Dimension29mm(height)x29mm( width)x30mm(length) Camera Weight45g(High-precision CNC aluminum alloy shell)AccessoriesColor cameras come with IR cut filter(mono camera does not have filter), 3m USB cable with fix screws, 6-pin Hirose GPIO connector, 1 CD with software and SDK.Spectral Response Curve.Dimension
GPIO Trigger interface introductionPower Supply Input Interface.
The camera is powered by USB3.0 Bus Power, the power supply of USB3.0 standard should be 5V@900mA. In actual applications, sometimes the host is not insufficient for power supply, or because the USB cable is too long, or because of anti-interference requirements, users can use "5V_IN" interface of GPIO to provide power supply for the camera. To ensure stable work of the camera, power requires DC + 5V, Min. = + 4.5V, Max. = + 5.5V; the drive current> 1A.
GPIO Input Interface
The following figure is the schematic diagram of GPIO input, the input signal has been insulated by opto-coupler TLP281. 200 ohm resistor is in series connection inside the camera. GPIO input interface is generally used for external trigger input signal synchronization acquisition for multi-camera, It also can be used as an external signal acquisition, please refer to the instructions in SDK (software development Kit) for detailed applications.
TLP281 conversion performance.The camera's internal optocoupler VCC = 5V, If IF = 16mA, then the external trigger input Rising edge Delay is 2us, Falling edge Delay is 25us;
When using "TRIGGER_IN +" as trigger source, the trigger electrical level range is 0V- + 5V. If the trigger source electrical level is out of this range, an external current limiting resistor should be connected, the optocoupler works under current of 10mA. Limiting resistor is calculated as follows:
R = 100 x ( Vin – 0.7 ) – R0
Vin is Trigger source electrical level
R0 is The camera's internal series resistor 200 Ohm
R is the required external series resistor.
Under normal temperatures (0- + 50 degrees) , the maximum operating current of the optocoupler is 50mA, standard operating current is 10mA, if it exceeds the maximum allowable current, optocouplers may be burned..
GPIO Output InterfaceThe figure below is the schematic diagram of GPIO output interface, the output signal has been isolated through the optocoupler TLP281, coupled with an NPN audion to magnify drive capability; GPIO interface is generally used to output camera flash light signals, users also can output signal through SDK.
1. GPIO work as a normal IO output.
The following figure shows the ordinary connection when output interface work as normal IO output, the user needs to provide external power supply and pull-up or pull-down resistors.
In the figure, "POWER" is the power supply for the user, "WR_GPIO" is the output electrical level signal which is set by the user in SDK. "GPIO_OUTPUT" is the output signal, please note that the output electrical level of the 2 connections is just the opposite.2. GPIO output to drive external load.
GPIO output interface is an open-drain output, it has certain drive capability to directly drive a small power device, as below figure, it is connected to 5V LED indicating light or low power flash lights.
3. GPIO output interface connected with flash light controller
The flash trigger interfaces of flash light controller are generally divided into the switch trigger and electrical level trigger two kinds; wire connection diagram is as follows:
In the figure, "POWER" and "GND" are external power supply for the user, the electrical level should meet the interface requirements of flash light controller.
Related ProductsJelly 1 USB 2.0 industrial digital camera price MUC36MC(MGYFO)Industrial camera for machine vision MU3S500M/C (SGYYO)
industrial camera with frame buffer MU3S640M/C (SGYYO)Our Company
BestScopeis a leading profesional optical manufacture in China with more than 10 years experience in the Microscopes and Industrial Cameras area. Payalotofefforts,the Bestscope® Microscope and Catchbest® IndustrialCanerahavebecomethewell-knownbrand all around the world,business covers more than 50 countries and states. Running by a strong R&D Team of 50 member to develop innovitive and customized products. More than 33000 m2 Area of workshop and the standardization management make sure the quantity production .
Packing & Delivery
