ZXH-600C ICU Ventilator with air compressor HRD

We are famous and old factory of anethesia machine and ventilator over 22years, we are same level with Beijing Aeonmed, Beijing Eternity, Beijing Read eagle, Beijing Aerospace Changfeng, Shenzhen Prob, Nanjing Perlong, Shenzhen Chenwei....
The ICU ventilator is aerodynamic, electronic-controlled ventilator, it has over ten respiratory mode, functions can be set through the respiratory rate, inspiratory time, tidal volume parameter to achieve management of the patient breathe, There are Japanese Sharp large screen true color LCD to show waveform and parameters, Germanic Baode proportion electromagnetism valve is suction control valve, Japanese SMC electronic air and oxygen mixer and etc. These high quality imported parts bring out the machine is more accurate, more reliable and more stable
Main technical parameters and performance
1. Respiratory Mode: A/C, SIMV, PSV, PCV, SPONT, MMV, IPPV, SIGH, PEEP;SIMV+PSV,SIMV+SPONT
2. Parameter setting up:
2.1 Tidal volume (Vt): 0 ~ 2000ml
2.2 Breathing frequency (f): 4 to 99 times / minute
2.3 SIMV Frequency: 6 ~ 60 times / minute
2.4 Inspiratory time (Ti): 0.2 ~ 6 s
2.5 Breath-hold time (Tp): 0 to 2 s
2.6 Trigger pressure (Pt): -2kPa~ 2kPa,
2.7 PEEP pressure: 0.1 ~ 2kPa,
2.8 PSV pressure: 0~ 5 kPa
2.9 Safety largest gas pressure: ≤6 kPa
2.10 Breathing oxygen concentration: 21 ~ 100%, consecutive adjustable
3 Alarm Performances
3.1 Pressure upper limit (Ph) alarm: 2 ~ 6kPa, sound and light alarm.
3.2 Pressure lower limit (Pl) alarm: 0 ~ 2kPa, sound and light alarm
3.3 Ventilation volume upper limit (MVh) alarm: more than settings, sound and light alarm.
3.4 Ventilation volume lower limit (MVl) alarm: less than setting, sound and light alarm.
3.5 Power disconnection warning: immediate alarm if power disconnection, warning time≥120s.
3.6 quiet sound alarm: ≤2min
4. Overall performance:
4.1 Drive mode: aerodynamic, electronic-controlled
4.2 10.4 inch colorful TFT screen
4.3 Power supply: AC 220 V ± 22V.50Hz ± 1Hz.
4.4 Aerodynamic source pressure: 0.28~0.6MPa
4.5 mainframe input power: 65VA.
4.6 complete machine noise: ≤65 dB (A).
4.7 Compliance system: ≤4 ml/100Pa