Adjustable wind speed advertising shop hot melted pvc plastic welder machine

******Theprictureandspecificationsaresubjecttochangewithoutpriornotice. ******
******Anyquestion,please/confirm/iwithoursalesmanager.******
Welcome to BowayCore Competence
We provide more than300kinds of office equipment for your need
(You may click the following picture to see more)Product UsesThis equipment is designed professionally for , sealing film or foil and homogeneous coating and PE-coated webbing belt lap welding that is make in PVC-P,PE,TPO ECB,CSPE ,EPDM ,PVDF. AppearanceSpecification Param Product NameBanner Welding MachineBW-TOP3400

Certification

CE & ROHS
Rated voltage
230V
Rated frequency
50HZ
Rated power
3400 W
Welding temperature
40-700℃
Welding speed
0.8-15 m/min
Welding thickness
0.2-3mm
Welding width
40-60 mm
Size(LxWxH)
41*42*56cm
Net weight
21KgAdvantages Details
♦ Small size, light weight and easy to carry
♦ Digital display function
♦ Adjustable wind speed
♦ Faster welding speed
♦ Do not have fold during the welding process
♦ Laser precision positioning system
♦ Having press-wheel, it is easy to move Connecting the power supply
Connect power to AC220V,turn on power button
Operation
1.Make the cloth for seaming flat and tight,. take joiner to accurate (about 2-4cm),Fix both ends by tape or glue on ground. (the ending image)
2.Set the temperature and walking speed: Connect the power supply, set the temperature and walking speed according to the thickness of the cloth. Temperature and speed is adjustable. As shown (the ending image)
3.Turning the heating switch (yellow knob), the machine starts to heat up. Wait for 2 minutes,when actual temperature (PV)approach desire temperature(SV),we can start weld. (the ending image)
4.Welding positioning. Lap welding pressure working wheels edge must be aligned with the upper edge of the banner, but also aligned with the guide wheel on the side edge of the banner. As below: (the ending image)
5. Lifting the handle, making the working wheel on ground,as the show (the ending image)
6.start welding: pulling the heat gun to position handle and making the nozzle close to ground then move the nozzle to left so that it can be place a right position, at that time, the welding will work automatic. (the ending image)
7.During welding,let hot air nozzle between two overlap pieces. And be make sure hot air nozzle and Rubber wheel walk in straight line.if not,please adjust by handrail.check photo: (the ending image)
8.finishing welding: when we finish these work, pull the handle shake, turn right to move out nozzle until stops rotating nozzle upwards and it is locks. (the ending image)
9. Turn off the switch: when finished, turn off the yellow knob,shut off main power supply when the PV value is less than 50 degree.then we can turn off the power.
NOTE
For first-time users, you can get a piece of scrap cloth to measure the temperature of the required , test methods are as follows:
Making quickly the cloth next to the nozzle, if there is a burning cloth, it shows the temperature at this time is possible. the effect of welding should be as follows:
1. During operating, if the surface cloth is dissolved and scorched or the cloth are not sticked together, please stop to adjust the temperature or speed.
2. During operating,if the seaming part is not in right position, please stop to adjust fixing position.
3. During operating, make sure clothes are flat so that stick together smoothly.
4. The hot wind of heater cannot touch the press-wheel or the rubber of press-wheel is easy to be burned down.
5. Adjust temperature to zero before turn off the heater.Switch off after 5-10 minutes.
Maintenance:
Take care the nozzle.Use brush to clean if there is dust or block in the nozzle or filter.Package & Shipment
Trading Terms Terms of paymentT/T, L/C, Westion Union.Terms of tradeFOB, CFR, CIFMode of transportationBy Sea, By AirPort of shipmentShanghai or NingboRerfence date of delivery
about 15 days, Instant supply
of hot-selling products
about Shipment Certificate of Fumigation√Certificate of Original
CO, FORM A, FORM F, FORM E etc.
Guarantee customer to import goods
at the preferential tariff rateCertificate of Inspection√documents Authentication√After-Sales Service
I. Agents Tranining
II. Warranty
We provide one-year limited warranty for all machines from the date of purchase
1.Our warranty covers only those defects which arise as a result of normal use of the product, and the bellows not apply to any:
uImproper or inadequate maintenance
uMisusage and mishandling
uDamaged by a wrong voltage use
uPhysical damage(for example, dropping the parts on the floor or into water, broken case, etc)
2.What is the repair, exchange & refund policy?
Exchange and refund only on big defective units (beyond repair).For buyers' used machines, we only can support repair service.
Repair:We provide free spare parts (just include the main board and motor) within the warranty period. Buyer should provide serialnumber and photos of defective machines, but buyer should pay the shipment charges and return us the broken parts.
Exchange:If you reported problem to us in one month on arrival of the machine, we accept the exchange. Buyer needs pay the shipback sea freight and the sea freight for new machine.
Refund:If you reported problem to us in one week on arrival of machines, we accept the refund, but we only refund you the paymentafter receiving the returned goods.
3.What about when one year warranty over time?
We still offer the repair service to you when the warranty time is over, even we can offer you the repair service in the whole life of machine.
4.How to support you when you purchase our machine in first time?
When you meet the problem of our machine under the situation that you are not familiar with our machines.
Do not worry, we can offer:
uUser Manual in English
uOperation Video
uSupport on-line
uYou can send your technician to our factory to attend the skill training.
Customers and Us
FAQ
1.What’s the product range?
Post press machine,such as Perfect glue binder, paper cutter, Roll laminator, UV coator machine and some small office equipment.
2.Are you a manufacture?
Yes, we are in Hangzhou which middle of shanghai and Ningbo
3.What is the minimum quantity for order?
5 pcs or 10000 USD for order.
4.Do you have stock product to sell?
Maybe , It’s depend on which machine ,you like?
5.Do you inspect the finished products?
Yes, Each step of production products will be camed out inspection by QC department before shipping.
6.How do you ship the finished products?
By Sea
By Plane
By courier, TNT , DHL, Fedex, UPS Etc
7.What’s the Payment term?
Payment term: T/T before shipment.
We accept payment via the Paypal /Western union/TT, you can choose as you like.
8.What’s the delivery time?
Within 15 days after get the paymentRelated Products
You may like therelateditems as thefollowingclicking image
Adjustable wind speed advertising shop hot melted pvc plastic welder machine