ARTNET DMX Controller DC12V and DC24VDMX512 DeCoder addressable DMX Controller

DMX512 DeCoder addressable DMX Controller
Parameters:
Working temperature
-20-60°C
Supply voltage
12V~24V
0utput
3 channels
Connecting mode
common anode
External dimension
L164*W65*H40 mm
Packing size
L183*W82*H60 mm
Net weight
360g
Gross weight
410g
Output gray
RGB each 256 levels
Output current
<4A(each channel)
Output power
12V:<144W, 24V:<288W
Direction for use
This product is in compliance with DMX512 protocol, and compatible autoindex addressing and manual establishment address.
Each universal DMX controller takes up 3 DMX addresses. It adopts 2 ways (autoindex addressing and code switch) to set up the address. When adopting the autoindex addressing, all switches are “off” status. When adopting the code switch to set up address, the 10th bit(FUN) is “off” status, and other 9 bits are binary value code switch which are used to set up the DMX starting address code. The first bit is the lowest order bit, and the ninth is the highest order bit. That can set up 511 address codes. The DMX starting address code is equal to the sum of 1st to 9th bit. If move down one bit of code switch (“ON” set “1”), you can get the placevalue of this bit. If move up (set “0”), the placevalue is 0. For example: if you want to set up DMX starting address code for 73, you should move down the 7th, 4th, and 1st bit of code switch for “1”, and others for “0”, Then the placevalue’s sum of 1st to 9th bit is 64+8+1. That is to say, the DMX512 starting address code is 73.
DMX input/output interface :