918-B waste cable wire stripping machine : VOLTAGE:380V/220vPOWER2KWMEAL800XW580XH1200mmWEIGHT200KGOUTPUT30meter/min
WIRE RANGE2~90mm
lCheck the rolling direction is right or wrong,, if not, adjust the button or connect the motor again. Make the direction same as picture above.
lAdjust the distance between 2 blades and 2 rolls.(adjust the blades to the position which can strip the outer plastic, adjust the rolls adhere to the cable which can smooth through the machine, same as the above picture.)
lAdjusting diagram(the distance of two rolls can be adjust by the two screw rod, refer to the picture; loose the screws and then adjust the distance between 2 blades)
1-3(1);1-4(2);2-3(3);2-4(4)
lReduction gear: oiling the reduction gear in time.( the speed of neutral position is zero,the higher gear the higher speed, change the gear after stop the machine, u need to put neutral position first)
MATTERS NEED ATTENTION:
Check the rolling direction first, don’t put your hands into the machine in order not to hurt.don’t stretch your hands into the protection cover and all the transmission parts.if u find something wrong with the machine, pls turn off the machine first and then check.keep children away from the machine.