3.3V TTL-232R-RPI Compatible Debug and Programming Cable

FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal with 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip for Windows 10 8 7 Linux MAC OS (6ft, Black)
Product Description
Every CARATAR cable is built to last for years with high quality industrial grade materials. This cable works with all Windows and Mac OS versions including the latest Windows 10 and Mac OS X 10.10(Yosemite) and 10.11(EI Capitan). This cable has 6 outputs: GND(Black), TXD(Orange),RXD(Yellow). This cable can be used for Raspberry development and a variety of other applications: upgrading Legacy Peripherals to USB; interface Microcontroller UART or I/O to USB; interface FPGA / PLD to USB; USB Instrumentation PC interface; USB Industrial Control; USB Software / Hardware Encryption Dongles.This serial cable is designed for use with the Raspberry Pi (RPi), an ultra-low cost, Linux based miniaturized computer. It can also be used as a generic serial cable for any application requires USB to TTL communicationEntire USB to TTL(3.3V) protocol is handled by the electronics circuit overmolded in the cable USB terminal.3 pieces "flying leads" connectors provide GND(Black), TXD(Orange), RXD(Yellow) signals. Data transfer rates from 300 baud to 3 Mbaud at TTL levels.On board FTDI chip has configurable internal EEPROM. High output drive option allow I/O pins drive up to three times the standard signal drive level. UART signals can be individually inverted by configuring the EEPROM.Industry most reliable FTDI chip set & device drivers for maximum compatibility. Works with all Windows and Mac OS versions.
Chipset
FT232RL
Product Name
TTL-232R-RPI
Product Type
UART Convert Cable
Standard Package
PE Bag
Category
Cable Assemblies
RoHS
Yes
Series
USB cables
Usage
USB to UART, Raspberry Pi (RPi)
Convert From (Adapter End)
USB - A, Plug
Convert To (Adapter End)
Single Pole, 3 Female Sockets
Length
3ft (1m)
Shielding
Unshielded
Cable
26AWG, OD 5.0mm
6-Foot FT232RL FTDI USB to TTL serial adapter cable for 3.3 V logic level serial communication (rx, tx and GND)
It is built with FTDI FT232 chip, FTDI’s royalty-free VCP allow for communication as a standard COM port and D2XX ‘direct’ drivers provide DLL application programming interface; a great conversion data cord to meet with your needs of debugging, boot-loading, programming, etc. NOTE: If any installation or usage issues, please email us or you may download a driver and usage guide on FTDI official website The original FTDI chip is embedded in the USB-A end; 3 way 0.1” header connector with GND (ground), RX and TX at 3V3 logic level. Applications:
Upgrading Legacy Peripherals to USB
Interface Microcontroller UART or I/O, FPGA / PLD to USB
Replace MAX232 type level shifters allowing for direct connection of products to PC
Industrial Control / USB Software / Hardware Encryption Dongles Features
- The I/O pins of the FTDI wire are configured to operate at 5.0V logic level - Entire USB protocol handled by the electronics in the cable;
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity;
- Data transfer rates from 300 to 3M baud rate at TTL levels;
- Internal EEPROM with users writable area; - Supply voltage comes from USB bus, no external supply required;
- UHCI / OHCI / EHCI host controller compatible Specific Interfaces: USB 2.0 type A Male Port ; 3 pin Female Socket flying leads
Supports Windows 2008, XP and XP 64-bit, Vista and XP 64-bit, CE 4.2, 5.0 and 6.0; Windows 7, 8, 8.1, 10 (32 and 64-bit); Mac OS 8/9 , OS-X; Linux 2.4 and greater What’s Included
1 x USB to Serial TTL Level Converter Cable
Detailed Images
Our Services