CNC Controls Programming Cable 25 Pin DB25 Male Connector 1.8m

FTDI Chip Usb to RS232 Serial Adapter Cable, CNC Controls Programming Cable, 25 Pin DB25 Male Connector, 1.5m, FTDI UC-232R US-232R Compatible, full RS232 signals
Product Description
USB to RS-232 Converter ver2.0(1-port USB to RS-232 Serial Converter with ESD protection)1.5m(60 inches) industrial grade USB to RS232(DB25 Male) adapter cable. It is an ideal solution for computer to communicate with many serial devices directly through USB port such as CNC, PLC, plotter, modem, Scanner etcThis cable is designed to make connection between USB port and serial devices(RS232), NOT for parallel printer or other devices based on parallel protocol (IEEE-1284), even though both have DB25 connector. It is a USB to Serial "NULL Modem" cable with Software Handshaking( XonXoff) using only three signals: TXD(Pin2), RXD(pin3) and GND(pin7). Check your devices setup prior to purchase.Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required. The TXD/RXD traffic is indicated by two LEDs(red/green) over-molded in the USB clear case.Industry Standard FTDI chip set & device drivers to ensure maximum compatibility and superior reliability for industrial applicationHeavy duty metal DB25 connector with locking screws on one end, transparent plastic USB housing on the other end of the cable with LEDs indicating data traffic ICFT232RL PC InterfaceUSB 2.0 Device InterfaceRS-232 Cable MaterialCopper wire Cable Size0.35m,0.5m,1.5m,1.8m,3m can be optional Transfer RateStandard RS-232 transfer rate Colorblack,tea or blue color Device SupportRS-232 Interface Package ListCable, CD Driver is optionalSystem Requirements Windows7,Windows8/Vista/XP/2000/ME/98SE Linux Mac OS 8.6 or higherApplication AreaUSB Smart Card Readers,ISDN terminal adapter,Bar code scanner,USB Hardware Modem,PDA-USB data transfer,etc
1.1.5m or 1.8m industrial grade USB to RS232(DB25 Male) adapter cable.
2.It is an ideal solution for computer to communicate with many serial devices directly through USB port such as CNC, plotter, modem, Scanner etc.
3.This product is designed to make connection between USB port and serial devices(RS232), not parallel printer or other devices based on parallel protocal(IEEE-1284), even though both have DB25 connector. Check your devices setup prior to purchase.
4.Works with USB 1.1 & 2.0 Host and Hub ports. Powered directly by USB port, no external power adapter required.
5.Industry Standard FTDI chip set & device drivers to ensure maximum compatibility and superior reliability for industrial application.
6.This is NOT a printer cable. This straight-thru cable converts any USB port into an RS232 connector on your computer. You can set the ports to COM1 or COM2.
Every Caratar Serial cable is built to last for years with high-quality industrial grade materials. THE cable is a USB to RS-232 full protocol interface adapter cable. No external power supply needed. Compatible with USB and RS-232 standards. THE cable is capable of performing the conversion from single-ended USB signal into UART signal of RS-232. DB25 male connector is used for connection from RS-232 interface. The unique I/O circuit of the internal zero delay auto transceiver contained in the converter controls the data stream direction automatically. The cable is plug-and-play for windows7, 8 and 10. This cable will work for computer USB to a CNC or other serial devices using XON/XOFF software handshaking or hardware handshaking(RTS/CTS or DSR/DTR). Most of the CNC controls are software based handshaking, this cable will work. Please contact the seller if you are not sure this cable works or not for your devices. Some examples: Acramtic Amanda Brother Bosch Boss DeltaDynaPath Fagor Haas Heidenhain Mazak Mori Mitsubishi based controls -all Sinumerik Yasnac Siemens and more
Detailed Images
Our Services
More customized requirement , freely contact sales on line as below for detail, thanks so much !!