Computer Use and 0.2m Cable Length USB to RS485 PLC Communication Cable
Product Description
FTDI USB to RS485 serial UART converter cable incorporates FTDI's FT232RQ USB to serial UART interface IC, which handles all the USB signaling and protocols. This FTDI converter cable provides a fast, simple way to connect devices with an RS485 interface to USB. Each FTDI USB-RS485 cable contains a small internal electronic circuit board utilizing the FT232R that is encapsulated into the USB connector end of the cable. The integrated electronics also include the RS485 transceiver plus Tx and Rx LEDs that give a visual indication of traffic on the cable. The USB-RS485 cable is designed for use at the end of an RS485 network up to approximately 10m.USB RS485 adapterUSB2.0. full speed 12M supportFT232 USB RS485 cable, signals compatible with USB-RS485-WE-1800-BTWith 2 LEDs for data+, data- transferingRed-VCC(5v),Black-GND,White - Data+, Green - Data-FT232RL + SP485LEEN chipSupport Android, Support Win 10, 8,8.1, Win 7, XP, 2000, Linux, Mac OSIntegrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5Support FTDI VCP driver and D2XX driverHalf duplex, non-isolated300 ~ 1Mbps baud rateUp to 5km distrance transfering1.8mtr in length.ABS USB housing, openable for testingProcessorFTDI FT232RLRS485 Interfacesingle wiresFail-safe bias resistorsYesUSB interfaceStandard Type A MalePorts1-port available for RS485SignalsRS485, 2-wire half duplex: D+, D-, GNDBaud rate300-921.600bps (up to 3kbps by using alising)TX / RX buffer size256 Byte Transmit Buffer / 128 Byte Receive BufferAdjustable USB transfer sizes for TX and RXFrom 64 bytes to 4096 bytesAdjustable latency timer1 to 255 msecAdjustable read and write timeouts0 to 10000 msecFlow ControlNone, Xon/Xoff, HardwareCOM port accessible byIncluded virtual COM port drivers or FTD2XX.DLLSpecial featuresCompatible with Modbus RTU/ASCII, BACnetSupports non-standard baud ratesAutomatic Send ControlElectrostatic (ESD) protection600W surge protection, 15KV static electricity protectionCurrent drawStatic: less than 80mA. Dynamic average: less than 150mAInterface complianceUSB1.1,2.0,3.0, EIA/TIA RS-232Working temp-20°C to 60°C
Detailed Images
FAQ
Our Services