FTDI Chip usb to RS485 Cable with TX RX LEDs 6ft to wire end adapter USB-RS485-WE compatible rs485 adapter cable with driver

FTDI Chip usb to RS485 Cable with TX/RX LEDs 6ft to wire end adapter USB-RS485-WE compatible rs485 adapter cable with driverUSB RS485 adapterUSB2.0. full speed 12M supportFT232 USB RS485 cable, signals compatible with USB-RS485-WE-1800-BTWith 2 LEDs for data+, data- transferingRed-VCC(5v),Black-GND,White - Data+, Green - Data-FT232RL + SP485LEEN chipSupport Android, Support Win 10, 8,8.1, Win 7, XP, 2000, Linux, Mac OSIntegrated 1024 byte EEPROM, support Vendor ID re-write,support Mprog3.5Support FTDI VCP driver and D2XX driverHalf duplex, non-isolated300 ~ 1Mbps baud rateUp to 5km distrance transfering TypeUSB to Serial rs485 Cable (OEM/ODM FTDI Cable)Connector 1USB 2.0 USB3.0
Connector 26Pin connector,6 open wires,DC3.5MM Plug optional or customized
Chipset UsedFT232 OR optionalCable3 core, 4 core, 6 core availablePinoutVCC, TXD, RTS, RXD, CTS, GNDSupportWINDOWS7/8/98/ME/2000/XP,Vista32,Mac8.6 or later,LINUX O.S,etc
Detailed Images
Package: 1 x usb rs485 adapter cable
about FT232RL
The FT232R is the latest device to be added to FTDI?s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID? security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a "3-in-1" chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID?) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.Single chip USB to asynchronous serial data transfer interface.Entire USB protocol handled on the chip - No USB-specific firmware programming required.UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity.Fully assisted hardware or X-On / X-Off software handshaking.Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).In-built support for event characters and line break condition.New USB FTDIChip-ID? feature.New configurable CBUS I/O pins.Auto transmit buffer control for RS485 applications.Transmit and receive LED drive signals.New 48MHz, 24MHz,12MHz, and 6MHz clock output signal Options for driving external MCU or FPGA.FIFO receive and transmit buffers for high data throughput.256 Byte receive buffer and 128 Byte transmit buffer utilising buffer smoothing technology to allow for high data throughput.Adjustable receive buffer timeout.Synchronous and asynchronous bit bang mode interface options with RD# and WR# strobes.New CBUS bit bang mode option.Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.Device supplied preprogrammed with unique USB serial number.Support for USB suspend / resume.Support for bus powered, self powered, and high-power bus powered USB configurations.Integrated 3.3V level converter for USB I/O .Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.True 5V / 3.3V / 2.8V / 1.8V CMOS drive output and TTL input.High I/O pin output drive option.Integrated USB resistors.Integrated power-on-reset circuit.Fully integrated clock - no external crystal, oscillator, or resonator required.Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.UART signal inversion option.USB bulk transfer mode.3.3V to 5.25V Single Supply Operation.Low operating and USB suspend current.Low USB bandwidth consumption.UHCI / OHCI / EHCI host controller compatible.USB 2.0 Full Speed compatible.-40°C to 85°C extended operating temperature range
FAQ
Our Services