Range extender Function and Wireless Type Universal Wireless range extender

Range extender Function and Wireless Type Universal Wireless range extender
Product Description
Embedded MIPS 24KEc 580MHz with 32KB I cache/16KB D cache.2T2R 2.4GHz with 300 Mbps PHY data rate.Legacy 802.11b/g and HT 802.11n modes.20/40 MHz channel bandwidth.Hardware NAT with IPv6 and 2 Gbps wired speed.WEP64/128,TKIP,AES,WPA,WPA2,WAPI.USB 2.0 host/device dual mode, Support 3G module.
Detailed Images
Product Specifications Wireless Access PointTransmission standard802.11b/g /nFrequency2.4GHzMode2T2RData rateUp to 300Mbps PHYMultiple BSSIDUp to 16 channelWi-Fi securityWEP64/128,TKIP,AES,WPA,WPA2,WAPIWPSSupport(PBC,Pin)WDS bridgeSupportQosWMM,WMM-PSVoice enterprise802.11k+rNetwork protocolTCP/IP,UDP,HTTP,ARP,DHCP,ICMP,NAT,DNS,PPPoE,FTPWired EthernetRJ45 InterfaceWAN/LAN : 10/100 Mbps Ethernet switchUSB Battery chargingCharge portUp to 4 x USB chargeCharge currentUp to 3A totalCharge volt5VCharge speedFast chargingSupport deviceUniversal charging to various devices : Support iPhone/iPad, Android phone, other smart mobile phone,and the other portable devicesTelephone line portRJ11 interfaceConnect telephone line to RJ11 port3G3G interfaceSupport 3G modul by usb2.0 interfaceStorageSD cardSupport SD/TF card storage up to 64GByteUSB storageSupport USB mass storageGeneralPowerAC 220V/110V/380VPower consumption0~15WOperating temperature-20 to+60 °CStorage temperature-40 to+60 °COperating humidity20- 80%RHStorage humidity20- 95%RHDimension86mm x 86mm x 42mm(L x W x H)Product featuresWall type WIFI router with the country's first telephone interfaceThe 11N 150M Wireless AP, transfer faster and more stableExempt hotel walls trouble playing online moduleWired and wireless integrationThe most complete wireless encryption technology, with WEP, WPA-PSK, WPA2-PSK, WPA, WPA2, MAC address authentication, and other encryption / security settings to make wireless networks more secureSupport relay function, let your WIFI broader range of distances.
Installation instruc
Remove the cover(Use a screwdriver to remove the cover from the panel surface)Connecting wire(The 220V wires, cables, telephone lines connected to the specified interface on the rear panel to ensure a firm connection,Connect the power off before connecting wires to connect 220V,Avoid electric shock).Mounting screws(Remove the screws from the box, put the socket into the bottom box fixed rear panel, the panel surface cover to cover, the surface.In the bottom box to adjust the screws tighten the screw ratio.)Install the cover(Cover snaps into the slot above the panel).
Packaging
Related Products
Company Information
Our Services