USB 2.0 to UART Bridge with TI chipset TUSB3410

USB 2.0 to UART (RS232/RS485) Bridge with TI chipset TUSB3410
Product Description
The TUSB3410 device provides bridging between a USB port and an enhanced UART serial port. The device contains an 8052 microcontroller unit (MCU) with 16KB of RAM that can be loaded from the host or from the external onboard memory through an I2C. The device also contains 10KB of ROM that allows the MCU to configure the USB port at boot time. The ROM code also contains an I2C bootloader. All device functions (such as the USB command decoding, UART setup, and error reporting) are managed by the internal MCU firmware in unison with the PC host.
Features
Fully Compliant With USB 2.0 Full-Speed Specifications: TID#40340262Supports 12-Mbps USB Data Rate (Full Speed)Supports USB Suspend, Resume, and Remote Wake-Up OperationsConfigurable to Bus-Powered and Self-Powered OperationSupports a Total of Three Input and Three Output (Interrupt, Bulk) EndpointsIntegrated 8052 Microcontroller With: 256 x 8 RAM for Internal Data10K x 8 ROM (With USB and I2C Bootloader)16K x 8 RAM for Code Space Loadable From Host or I2C Port2K x 8 Shared RAM Used for Data Buffers and Endpoint Descriptor Blocks (EDBs)Master I2C Controller for EEPROM Device AccessMCU Operates at 24 MHz, Providing 2-MIPS Operation128-ms Watchdog TimerEnhanced UART Features: Software and Hardware Flow ControlAutomatic RS-485 Bus Transceiver Control, With and Without EchoSelectable IrDA Mode for Up to 115.2-kbps TransferSoftware-Selectable Baud Rate From 50 BPS to 921.6 kbpsProgrammable Serial-Interface Characteristics 5-, 6-, 7-, or 8-Bit CharactersEven, Odd, or No Parity-bit Generation and Detection1-, 1.5-, or 2-Stop Bit GenerationLine Break Generation and DetectionInternal Test and Loopback CapabilitiesModem Control Functions (CTS, RTS, DSR, RI and DCD)Internal Diagnostic Capability Loopback Control for Communications
link-Fault IsolationBreak, Parity, Overrun, Framing-Error Simulation NameUSB 2.0 to UART (RS232/RS485) BridgeEmbedNoChipsetTUSB3410FunctionFull Speed USB to High-Speed UARTproduct can be saleBoard(s), Cable(s)
To customer:
based TI chipset TUSB3410, our factory can customize different function according your device machine
aslo, same function, FTDI chipset can support well too
welcome ODM and OEM if you need
FAQ
Our Services