USB to DMX Interface Adapter LED DMX512 Computer PC Stage Lighting Controller Dimmer

USB to DMX Interface Adapter LED DMX512 Computer PC Stage Lighting Controller Dimmer
USB to RS485 dmx cable for Stage Lighting Equipment control
USB RS485 TO XLR 3P female socket for dmx cable
XLR 3P male/female, XLR 3P female
USB RS485 converter
FT232+SP485
300 ~ 3Mbps baud rate
Up to 5km distance transfering
half duplex,non-isolated
ESD protection integrated
Support Android, Support Win 8, Win 7, win 10, Linix,
Mac OS, Android
Internal 1024 byte EEPROM
support Vendor ID re-write,support Mprog3.5
Support FTDI VCP driver and D2XX driver
26AWG * 3 core, OD4.0mm, PVC jacket
FTDI driver download website:www.ftdichip.com;
Freestyler software download website:http://freestylerdmx.be
DMX software download: https://www.dmxcontrol.org/en/downloads.html
Drivers are available which allow FTDI devices to work with the following operating systems: TypeUSB to Serial rs485 Cable (ODM/OEM FTDI Cable)Connector 1USB 2.0 /USB 3.0
Connector 26Pin connector,6 open wires,DC3.5MM Plug optionalChipset UsedFT232 OR optionalCable3 core, 4 core, 6 core availablePinoutVCC, TXD, RTS, RXD, CTS, GNDSupportWINDOWS7/8/98/ME/2000/XP,Vista32,Mac8.6 or later,LINUX O.S,etc

Windows 10
Windows 8.1 x64
Windows 8
Windows 8 x64
Windows Server2012
Windows Server 2008 R2
Windows 7
Windows 7 x64
Windows Server 2008
Windows Server 2008 x64
Windows Vista
Windows Vista x64
Windows Server 2003
Windows Server 2003 x64
Windows XP
Windows XP x64
Windows ME
Windows 98
Linux
Mac OS X
Mac OS 9 Mac OS 8
Windows CE.NET (Version 4.2 and greater)
Android
Windows RT
Package:
1XDMX control RS485 cable
Detailed Images
Meet the intelligent lighting control system based on RS485 busCREATOR Express CR-DMX512 expansion card is based on the actual needs of the user and optional, is mainly used to increase the support of the control host DMX512 control protocol. Used to control the series of lamps that support the DMX512 protocol, such as moving head lights, LED marquees, LED rotating bulbs, DMX crystal magic ball lights, and home stage lighting. main feature: Use the internationally accepted DMX512 transmission protocol;
Up to 512 channels of output can be sent to a single card, and 4 DMX512 control cards can be supported in a single console.
256 levels of dimming
Standard EIA485 interface;
Using a combination of balanced drivers and differential receivers, the ability to resist common-mode interference is enhanced, that is, noise immunity is good;
The DMX512 card can transplant the control of the stage lighting to the touch screen or the tablet computer. It can be used to preset the scene and simplify the operation.
Can directly control any dimmer using the same protocol to form a digital dimming control system;
Can control all kinds of DMX512 protocol dimmers, silicon boxes, controllers, and even cold flame machine, smoke screen, computer lights and other effects equipment;
It can store light scenes, edit chase programs, and support dimming consoles to run manual dimming scenes, integrate control scenes, and chase programs. From the above we can know that he is supporting the 485 port protocol.What is DMX512?In the dimming and control of LED lamps, a large number of people have adopted the DMX512 control protocol, which was proposed by the United State Institute for Theatre Technology, Inc. in August 1986 and can be transmitted on a pair of lines. 512 thyristor dimming brightness information standard. The DMX512 communication mode uses an asynchronous communication format. Each dimming point consists of 11 bits, one of which is a start bit, 8 bits of dimming data, and two stop bits. Each transmission can have 512 dimming points. EIA485 (RS485) DMX512 is designed around the industry standard EIA485 interface. EIA485 belongs to the "electrical" end of the interface, voltage, and current. How to use: A dmx512 controller is the heart of many stage lighting systems. These controllers usually have stage lights installed anywhere they are found, including theaters, school halls, and even churches. The DMX 512 controller works by a series of sliders. The number and sum of each slider is called the channel. Most entry-level controllers will use 4- or 8-channel systems. The stage lights are connected to a specific channel of the DMX 512 controller. The slider will then control the on/off function of the light. Set the light DIP switch to the correct channel. Each DMX light will have a pair of numbered switches. These small white switches will range from 1 to 256, depending on the specific light. For the first light, push the "1" mark on the switch to the "on" position. This will set this light to be controlled by the DMX controller with slider number 1. Set the second light's DIP switch. If you want this light to work with the first light hole at the same time, set the switch to "1" marked as "on", just like the first light. If you want to control it from the first independent light, then set the switch to "2" marked as "ON". This will set the light to be controlled by the DMX controller with the number of sliders 2. Connect a DMX cable to the back of the DMX 512 controller. Plug it into the port labeled "DMX OUT" and you're back. Connect the other end to the first DMX light. The light will have a port labeled "DMX in" at this end of the connecting cable. The second DMX cable is connected to this first light. Use the "DMX OUT" port labeled to connect the cable. Run the cables connected to the second light to combine them. This end is connected to the "DMX in" port of the second hole. There should now be cables from the DMX controller, with the first light, and two indicator lights as well as cables. Test lighting control. Power on the DMX 512 control board. Push slider channel 1 all the way up to 100% strength. If the lamp is set to control at the same time, this should be on both power indicators. If not, then it should only have the power light on. If the lamps are all set up with separate controls, press the slider channel 2 all the way up to 100% intensity, on the power indicator light 2. Follow the above steps, if necessary, to repeat the DIP switch settings and connect the DMX cable as many lights as possible.
FAQ