USB to TTL Serial Cable FTDI (Genuine) chipset +5V Transparent with LEDs
Product Description
The cables are available with a 6-way SIL, 0.1" connector and are available at TTL levels of +5v and +3v3 in BLACK or TRANSPARENT with Rx and Tx LEDs.
See our other listings for different Voltage/Moulding:
USB0TTL5B - 5v TTL with BLACK Moulding
USB0TTL3B - 3.3v TTL with BLACK Moulding
USB0TTL3T - 3.3v TTL with TRANSPARENT Moulding with Rx/Tx LEDs
Simple and Easy way to give USB support to your designs
Connects directly to microcontroller UART or I/O pins
PC communicates as a standard serial device
All circuitry integrated into sleek, moulded USB plug
Compatible with legacy software.
based on FTDI FT232R
6-way connector (Gnd, CTS, VCC, TX, RX, and RTS)
Supports data rates up to 3 Mbaud allowing a significant performance increase over a standard serial port.
Allows devices to be powered from the USB port.
All I/O are protected from shorts and ESD.
Drivers Supplied by FTDI
Can by customised for own branding (USB VID, PID, Descriptors etc.)
Cable Length 1.80m (6 ft)
WirePinType
Function
Black1 power
Ground
Brown2 Input
CTS (Clear to Send - Device is ready to receive)
Red3 Output
VCC (+5v)
Orange4 Output
PC serial Tx (TTL Rx)
Yellow 5 Input
PC serial Rx (TTL Tx)
Green 6 Output
RTS (Request to Send - PC has data to send)
Parameters
Min
Typ
Max
Units
Serial port speed
300
3000000
baud
Power output voltage* (3v3)
2.50
3.3
3.50
Volts
Power output voltage* (5v)
4.255.0Volts
Power output current
mA
Operating Temperature
-40
+85
°C
Input Voltage threshold
1.0
1.2
1.5
V
Output Voltage High (3v3)2.2 2.8 3.2
V
Output Voltage High (5v) 3.2 4.1 4.9
V
Output Voltage Low 0.3 0.4 0.6 V
*Power supply voltage is dependant on the USB port to which the cable is connected. The minimum specified is the expected worst case when connected through a bus-powered hub that conforms to the USB specification. DRIVERS
Drivers for Windows, Mac and Linux are the standard FTDI drivers and can be downloaded from the FTDI website
Our Services