usbrs485we1800bt 0.2m Cable Length and Mobile Phone Use 1.8m USB-RS485-WE-1800-BT open end usb cable FTDI Chip with TX RX LEDs

usbrs485we1800bt 0.2m Cable Length and Mobile Phone Use usb rs232 to open end usb cable
Product Description
The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals. It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols. The cable provides a fast, simple way to connect devices with RS485 interface to USB. It contains small internal electronic circuit board utilising the FT232R which is encapsulated into USB connector at one end of cable. The other end of the cable is bare, tinned wire ended connections. The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable. The USB side of cable is USB powered and USB 2.0 full speed compatible.
Black cable and transparent USB connector
24AWG, 6 core cable
Cable length of 1.8m (6feet)
Diameter of 5mm
FCC and CE compliant
Support for FT232R FTDIChip-ID feature for improved security
Maximum UART baud rate of 3Mbaud
Internal EEPROM with user writeable area
EIA/TIA-485 communication interface with low power requirements
Operating temperature range from -40°C to 85°C
ProcessorFTDI FT232RLRS485 Interfacesingle wiresFail-safe bias resistorsYesUSB interfaceStandard Type A MalePorts1-port available for RS485SignalsRS485, 2-wire half duplex: D+, D-, GNDBaud rate300-921.600bps (up to 3kbps by using alising)TX / RX buffer size256 Byte Transmit Buffer / 128 Byte Receive BufferAdjustable USB transfer sizes for TX and RXFrom 64 bytes to 4096 bytesAdjustable latency timer1 to 255 msecAdjustable read and write timeouts0 to 10000 msecFlow ControlNone, Xon/Xoff, HardwareCOM port accessible byIncluded virtual COM port drivers or FTD2XX.DLLSpecial featuresCompatible with Modbus RTU/ASCII, BACnetSupports non-standard baud ratesAutomatic Send ControlElectrostatic (ESD) protection600W surge protection, 15KV static electricity protectionCurrent drawStatic: less than 80mA. Dynamic average: less than 150mAInterface complianceUSB1.1,2.0,3.0, EIA/TIA RS-232Working temp-20°C to 60°C
Detailed Images
FAQ
Our Services