solid graphite #500SP1 500SP2 #500SP3 #500SP5 brass bronze slide bearing and pads

slide bearings,oilite bearings Introduction
1.The solid bronze/iron material is ideally suited for highly demanding applications in tough environments. We offer a standard assortment of plain sleeve bushings, flanged bushings and sliding plates in accordance with ISO 4379 and DIN1850.
2.The solid bronze body can be drilled holes and filled solid graphite lubricant, in this way it can be used in oilless environments.
3.Also the solid bronze body can be machined oil grooves and holes, it can get better lubricating after filled with grease.Features and advantages
1.Insensitive to dirty environment
2.Resistant to shock loads and vibrations at slow speeds
3.Enable operation with a poor shaft surface finish
4.Good resistance to corrosive conditionsMaterial
Solid Bronze bushings and plates are made completely of tin bronze, CuSn10P, which has very good machine ability. All surfaces of the solid bronze bushings are machined.
Solid iron bushings and plates are made in same way of bronze material, but it is much lower costs if you are not in high performance requirements.Examples of applications
1.Construction machinery
2.Transport equipment
3.Pulp and papermaking machinery
4.Off-shore equipmentBronze
CuZn25Al6Fe3Mn3 + Graphite
Iron
Cast-iron + Graphite
Density
8.2g/cm3
Tensile Strength
>=755N/mm2
Anti-compact Tenacity
>=400~500KJ/m3
Hardness
>=200HB
Max Load Pressure
100N/mm2
Speed Limit
0.5m/s
PV value limit
1.65N/mm2.m/s
Friction coef
Oil Lubrication
0.03
Dry Friction
0.16
Working temperature
-40~+300°CTypes and sizes list:
1.Sleeve
2.Falnged
3.Washer
4.Sliding platePlant

Production LineInspection Packings:Other bushings:
bronze bushing / sintered bushing / PTFE composit bushing / wrapped brozne bushing/bimetal bushing SF-1(du) oilless bearing bushing (PTFE Composite)SF-2(dx) slide bearing bushing (POM Composite)FB090(FB090G) bronze bushingFB092 bronze bushingJDB,JFB solid graphite lubricating bushingJF bi-metal bushingFU sintered bronze or iron bushingFZ POM/Al/Cu ball cage retainerFR metal mesh+PTFE Soft stripsJGB Graphite bearingsAlso we can make customized bushings as per your drawings or samples.
Welcome inquiry us for details so that we can offer you related information at the first time!