25t eyelet punching machine sheet metal perforating machine

Product Description
Punching machine, is a stamping press. In the national production, the stamping process of than traditional mechanical processing for material and energy saving, high efficiency, technical requirements for operators is not high and through a variety of mold application can make machining these advantages, the products cannot be achieved by thus its use more and more widely.Mainly for sheet stamping production. Through the mould, make the blanking, punching, forming, deep drawing, trimming, fine blanking, plastic, riveting and extrusion, etc., are widely used in various fields. If we use the switch socket, cups, cupboard, dishes, computer case, even missile plane... There are so many accessories can use punch through the mold production.
Name
Unit
specification
Nominal force
Kiln
250
Slider stroke
Millimeter
70
Slider strokes
Times/minute
70
Closed height (the uppermost slider of the screw is at the bottom dead center)
Millimeter
200
Closed height adjustment
Millimeter
40
Slider center - body distance
Millimeter
180
Workbench size (left and right × front and back × thickness)
Millimeter
515×320×45
Workbench blanking hole diameter
Millimeter
Φ130
Slider bottom size (left and right × front and rear)
Millimeter
190×170
Mold hole size (diameter × depth)
Millimeter
Φ40×60
Distance between columns
Millimeter
220
Motor Power
kilowatt
2.2
Dimensions (length × width × height)
Millimeter
700×1100×2000
Total weight of the fuselage (about)
kilogram
1000kg
Direction for use
使用说明

Press for blanking, forming shall follow the following procedures. When two or more people operate, should a person driving, pay attention to coordination. Before coming off work should be fell on mould, disconnect the power supply, and make the necessary cleaning. Exposed to the outside of the compressor driving part, must be installed protective cover, banned under the condition of the unloaded shield driving or commissioning. Open the run-in test when necessary. Install mould slider must be open to the bottom dead center, height must be correct, as far as possible avoid eccentric load; Mould must be tightened, and check after pressure test.

Packing&Shipping
Wooden support board protection with protective film
After Sales Service
Chuangke machine after-sales service
This product after-sales quality assurance for a year, excellent product quality, perfect after-sales service system, to protect you
Company Introduction
Zibo and machinery co., LTD is a production and sales in the integration of punching machine manufacturers. The company has strong professional technical force, perfect after-sales service system, the escort for your business.