GPS Module Expansion Board for Raspberry Pi Global Applicable

Waveshare SIM7600G-H 4G / 3G / 2G / GNSS Module for Jetson Nano, GPS Module Expansion Board for Raspberry Pi Global Applicable
Product Description
Note: Jetson Nano is NOT included.
Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
Overview
This is a 4G/3G/2G communication and GNSS positioning module designed for Jetson Nano, it supports global LTE CAT4 up to 150Mbps for downlink data transfer, with pretty low power consumption.
Just attach it onto the Jetson Nano Developer Kit, easily enable functions like 4G high speed connection, wireless communication, remote video monitoring, making telephone call, sending SMS, global positioning, and so on.
Features
40PIN GPIO extension header for connecting Jetson Nano
Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
Supports GPS, BeiDou, Glonass, LBS base station positioning
onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports 1.8V/3V SIM card
onboard 3.5mm audio jack with earphone and mic support, for making telephone call
2x LED indicators, easy to monitor the working status
onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
Baudrate: 300bps ~ 4Mbps (default: 115200bps)
Autobauding baudrate: 9600bps ~ 115200bps
Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Comes with development resources and manual (examples for Jetson Nano/Raspberry Pi/Arduino/STM32)
Communications Specifications
LTEWCDMA / TD-SCDMA / CDMA 2000 EDGEGSM/GPRSBandLTE-TDD B34/B38/B39/B40/B41
LTE-FDD B1/B2/B3/B4/B5/B7/B8
/B12/B13/B18/B19/B20/B25/B26/B28/B66UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19GSM/GPRS/EDGE 850/900/1800/1900MHEmitting power0.25W0.5W@EGSM900
0.4W@DCS18002W@GSM900
1W@DCS1800Data SpeedLTE CAT 4
Uplink≤50 Mbps
Downlink≤150 MbpsUMTS
Uplink≤384Kbps
Downlink≤384KbpsHSPA+
Uplink≤5.76Mbps
Downlink≤42MbpsTD-SCDMA
Uplink≤128Kbps
Downlink≤384KbpsTD-HSDPA/HSUPA
Uplink≤2.2Mbps
Downlink≤2.8MbpsCDMA2000/EVDO
Uplink≤1.8Mbps
Downlink≤3.1MbpsEDGE
Uplink≤236.8kbps
Downlink≤236.8kbpsGPRS
Uplink≤85.6kbps
Downlink≤85.6kbpsSIM CardNormal SIM (Not Included)Applicable RegionGlobal 4G/3G/2G
GNSS Specifications
Receiver type:
16-channel
C/A code
Sensitivity:
Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD)
Cold starts: -148 dBm
Time-To-First-Fix (open air):
Cold starts: <35s
Hot starts: <1s
Accuracy:
Position: <2.5m CEP
SMS and Audio Specifications
SMS
Supported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio feature
Supports echo cancellation
Supports noise reduction
Other Specifications
Power supply: 5V
Operating voltage: 5V/3.3V (configured via jumper)
Operating temperature: -30°C ~ 80°C
Storage temperature: -45°C ~ 90°C
What's on Board
1.SIM7600G-H
2.NAU8810 audio decoder
3.TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
4.MP1482 power chip
5. RT9193-33 voltage translator: translates 5V into 3.3V
6.40PIN GPIO header: for connecting with Jetson Nano Developer Kit
7.SIM card slot: supports 1.8V/3V SIM card
8.USB interface: for testing AT Commands, getting GPS positioning data, etc.
9.3.5mm earphone/mic jack
10.MAIN antenna connector
11.AUX antenna connector
12.GNSS antenna connector
13.Network status indicator
14.Power indicator
15.UART enable switch:
ON: connect UART ports of SIM7600 and Jetson Nano
OFF: disconnect UART ports of SIM7600 and Jetson Nano
16.Operating voltage selection jumper:
VCC - 3.3V: set operating voltage as 3.3V
VCC - 5V: set operating voltage as 5V
17.PWR control config:
PWR - 5V: SIM7600 auto startup on power up
PWR - D6: SIM7600 will be turned on/off by D6 pin of Jetson Nano
Product Images
Dimension
Development Resources
Wiki : www.waveshare.com/wiki/SIM7600G-H_4G_for_Jetson_Nano
PACKAGE CONTENT
Weight: 0.233 kg
Note: Jetson Nano is NOT included.
1.SIM7600G-H 4G for Jetson Nano x1
2.LTE Antenna x1
3.GPS External Antenna (B) x1
4.Jetson Nano USB Adapter x1
5.Screws pack (2pcs) x1
Company Information