Optical Fingerprint Reader Sensor door lock Fingerprint Module Fingerprint Module for Arduino Mega2560

Optical Fingerprint Reader Sensor door lock Fingerprint Module Fingerprint Module for Arduino Mega2560
Specifications:
Model type: O40
Supply voltage: DC 3.8 ~ 7.0V
Backlight color: red
Light way: long light / flashing
Supply current: Operating current: <60mA
Peak current: <85mA
Fingerprint image input time: <0.5 seconds
Window area: 15 x 17mm
Matching method: Comparison method (1: 1)
Search method (1: N)Characteristic file: 384 bytes
Template file: 786 bytes
Storage capacity: 240
Security Level: 3 (from low to high: 1,2,3,4,5)
False Acceptance Rate (FAR): <0.001% (Security Level 3)
Refusal rate (FRR): <1.0% (security level is 3)
Search time: <220 ms (1: 240 average)
Host interface: UART (TTL logic level)
Communication baud rate (UART): (9600 x N) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)

Working temperature: -30 °C to +70 °C
Storage Temperature: -40 °C to +85 °C
It can work with any microcontroller which with serial port:such as Arduino,51,avr,stm32,pic,arm,msp430Many functions:fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint searchApplications:
Fingerprint door locks, safes, guns, financial and other security areas;
Access control systems, industrial computers, POS machines, driving training, attendance and other areas of identity;
Private clubs, management software, licensing and other management areas;
Medicare recipients, pensioners receive, fingerprint payment and other financial areas.Fingerprint Module works with UNO R3 Connection:
pin #2 is IN from sensor (GREEN wire)
pin #3 is OUT from arduino (WHITE wire)
5V connect sensor (Red wire)
GND connect sensor (Black wire)
Fingerprint Module works with 2560 R3 Connection:
pin #10 is IN from sensor (GREEN wire)
pin #11 is OUT from arduino (WHITE wire)
5V connect sensor (Red wire)
GND connect sensor (Black wire)Package Includes:
1 X Optical Fingerprint Reader Sensor
1 X Cable
FAQ
Q: Can the wires be replaced if I want to move it to a new project? What are the wire connections called?
A: The white connector space is 1.27mm, if you want to use it for other projects, there is no need to change whole cable, you just need to solder female dupont cable or male dupont cable, then add heat shrink on the solder position, please check this picture http://s5.ecpperp.com/flyfun/data/upload/product_img/190411/FZ2904A.png




Company Information