Lng Dispenser Biogas Dispenser Lng Pump

LNG DISPENSER, RT-LNG112, isdesigned to fill the LNG orbiogas to LNG vehicles in gas station.
Specifications:
* External Dimension: 2200x 1080x 580mm
* Ambient Temperature: -40o C~+55o C
* Humidity: ≤ 95%
* Max Flow: 50kg/m
* Accuracy: ± 0.10%
* Repeating Accuracy: ≤ 0.15%
* Working pressure:20Mpa
* Max pressure:25Mpa
* Power: AC110V± 20%, AC220V± 20%, AC380V± 20% (50Hz)
* Noise: ≤ 70dB(A class)
* Unit price range: 0~9999, 0~999999 (changeable)
* Single range: 1~9999.99, 1~999999.99(changeable)
* Accumulative range: 0~9999999999.99
* Electronic Calibration.
* Voice and printer (option).
* Fueling times limit function.
* Function of locking pump.
* Stop fueling by integer sale.
* Can set the decimal point for the display, so can be used in many country with different currency rate.
* Leaves the communication ports, so it can Communicate with the gas station management system.
* Can communicate with the IC card reader.

Applications: Refueling of LNG vehiclesCompatible gases:Liquefied natural gas or biogasType of LNGor LBG:Cold (3 bar) and saturated (6/8 bar) LNGMax. flow:170 l/min / 45 GPMMax. service pressure:Up to 20 bar / 290psiWeights and measurescertifications:MId (Europe) Power requirements:24VDC, and 230VAC (for heaters)


Each dispenser is electrically and mechanically pre-tested. On site performance test validates that the process performances of the refuelling stations are met.

ISO 9001+ ISO 14001, ATEX (ref),IECEX,
High accuracy measurement (99,5% trough CORIOLIS flow meter) and possibility of weights and measures approval of the dispenser
Fully equipped with fuelling and venting hoses, nozzles,and break-away systems
Fully automatic vehicle boil-off gas recovery line ensuring close to zero venting to atmosphere
Refuelling is achieved either by low flow signal, or high pressure. Thus ensuring double safety against over fuelling
Heated nozzle receptacles ensuring minimum ice building when extensive use is required
High safety level ensuring easy and safe operationCollector for safety valves redirected to the station storage tankGrounding of the entire dispenser and the vehicle tank during fuellingUse of explosion proof equipments for zone 1/Division I enclosureSpecial insulated flexible hoses in order to avoid cold burning for the operatorThe dispenser is designed following strongest safety regulation such as Atex, IECEx, NFPA, or UL codesIntegrated air instrument purge gun in order to clean the nozzle before connectionDigital display with total price, total volume, and price per Kg indicationThe dispenser electronics is ready to be connected to a payment system. Different communication protocols are availablePossibility to chose between cold and saturated fuel and single or dual hose operationEasy operation which requires minimum training for userSpecific PLC technology allowing remote maintenance and trouble shooting by Realtech support team
Weights and measures approved dispenser (MID, NTEP on demand, NMI)Single or dual hose dispenserCold and saturated fuel refuelling managementHeated receptaclesDifferent type of refuelling nozzles available (Parker Kodiak, J.C Carter, Macrotech)Possibility to customize the dispenser according to specific requirementIC CARD management systemIFID card management systemBank Card management system