AB Epoxy glue for Magnetic steel Magnetic shoe bonding SE1009

SE1009 is a two-compon, slowly cure epoxy adhesive, which is halogen-free, good bonding strength, high toughness, and excellent impact resistance. It has fast positioning and suitable for most materials bonding, such as metal and ceramics.
PROPERTIES UNCURED Part APart BAppearancetranslucent liquidPale yellow liquidChemical typesEpoxy resinModified aminesDesnsity (g/ cm3 )1.120.96Viscosity (mPa.s)6000-150006000-18000
PROPERTIES MIXED Part AAppearance Pale yellow liquidDesnsity (g/ cm3 )1.04Mixing ration (A:B) volume ratio1:1Viscosity (mPa.s) 55000Operate time (H 2 0g@25 °C ) 4

PERFORMANCE AFTER UNCURED
(Curing condition: 25 °C , 48h)
FigureStandard appliedHardness (Shore D)70GB2411-1980Shearing strength for different materials (Mpa.)GB/T 7124-1986Aluminum20.4
Steel22.6 Copper18.7 ABS4.5 PC7.9 Nylon668.5 PVC6.3

DIRECTION FOR USE
Clean the bonding surface before use (Recommend using SEAYU752), remove the oil stains, and dust of the bonding surface. Please do not use alcohol, gasoline or paint cleaner. If you want to have a high mechanical strength, adhesion to the surface by mechanical polishing, sandblasting or chemical corrosion treatment.Mix the resin and curing agent proportionally, lay the mixture egualmente on two bonding surfaces, adhesive layer for 0.05mm.The curing speed depends on the quantity of one-time mixture and ambient temperature, more mixture and higher temperature faster curing.The remaining unmixed adhesive to be sealed, stored frozen in a cool dry place.
NOTICE
Keep far away from children.
It is recommended to use at well ventilated place.
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse with a plenty of clean water immediately and go to the hospital for an examination.

STORAGE
Store the product in a clean and dry location in unopened containers at 8 -2 8 °C
Shelf-life: 24 months