M403 is a single component, high viscosity, low smell, not albino cyanoacrylate instantaneous adhesive.It is a single component, high viscosity, low smell, not albino cyanoacrylate instantaneous adhesive.
Properties Typical Value Range Testing standard Chemical Type : Alkoxyethyl CyanoacrylateColor: TransparentViscosity@25°C(mPa.s)600-2000GB/T2794-1995 Specific Gravity@25°C 1.10 Max Fill gaps(mm) 0.20Shearing Strength(Al/Al, Mpa) ≥8GB 1040-1992 Work Temperature(°C) -54-83 Time For Fixture(s) 20-50
Direction For Use:
1.The Surface to be bonded should be cleaned and free from dirt and oil.
2.Spread the glue on both surfaces which are to be bonded, and then press the two surfaces
together.
3.On most materials, it will cost 12-24 hours to be fully cured.Keep far away from children.
It is recommended to use at well ventilated place.
In case of contact with skin, rinse with soap water immediately. If contact with eyes, rinse
with a plenty of clean water immediately and go to the hospital for an examination. 4020270 500g/bottle